Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Dual Radiant Element - 9 Inch Specifications
In need of a replacement part for your stove? You're on the right page. Meet the GE Dual Radiant Element, a handy little part designed explicitly for your range. This part is all about supplying heat right where you need it, working behind the scenes, so your meals come out perfectly every time. At 9 inches, this dual radiant heating element ensures that your stove performs at its peak. It helps your appliance return to its original glory, even after years of daily operation. Before diving into installation, remember to switch off the power at your electric panel. This means either pulling the plug on your range or switching off the house's main circuit breaker to ensure safety. When handling and installing, we recommend using work gloves to keep your hands safe. This radiant dual element not only revives your stove's performance, but it also continues the legacy of high-quality products that GE Appliances is renowned for. Trust us - your stove will be back to running like new in no time!
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric.
Part# WB30T10122 replaces these:
AP4346265
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Dongxiao M - October 25, 2019
Verified Purchase
It works
So far so good.
Justin B - December 31, 2023
Verified Purchase
Easy repair, super fast shipping
The part shipped to me ridiculously fast. I was actually very surprised by the shipping time. Part was securely wrapped and works so well.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Center element of dual element burner would not glow.
Unplug stove. Remove two screws holding down cooktop located on oven side just under cooktop front edge. Lift cooktop and prop up exposing underside. Suggest taking phone picture, making drawing or labeling of wire connections of the affected element. Use pliers to pull wire terminal clips off element blade connectors.The underside of element frame pans have number scale at the peripheries. Remove the single screw of clip mount on old pan and remove old burner. Transfer the old mounting hardware and clips to the new element pan by installing them at the corresponding number locations. Remount new burner by loosening that single screw clip to allow easier install and positioning. Tighten screw. Reconnect wires to corresponding blades. Lower cooktop. I plugged stove in to test at this point (optional). Re-install the two screws located on ovenside cooktop edge. Plug in stove. Complete!
Other Parts Used:
-
JEFFREY from ROANOKE, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2321556
Manufacturer Part Number: WB30T10122
Manufacturer Part Number: WB30T10122
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST