Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Bake Element - 3400W Specifications
This 3400-watt bake element has screw style connections. The bake element is located on the bottom of the oven cavity and supplies the heat for baking. If your oven is not heating evenly, element will not heat, or there is little to no heat when baking, you may need to replace the element. When replacing the element make sure to hold the wires forward so the wires do not fall back through the rear of the oven. This is a genuine OEM bake element. Please remember to disconnect the power to your range before you start your repair.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Wall Oven, Range, Microwave Oven Combo, Microwave.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Electrolux.
Part# 318254906 replaces these:
AP4298966, 1259831, 318254900, 318254901, 318254909
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Rick S - September 15, 2021
Verified Purchase
Done
it worked and I'm happy about that
Donna T - November 6, 2019
Verified Purchase
Right part- fast delivery
We ordered the bottom element and it arrived before the expected delivery date. Easy fix.
Maria P - March 16, 2025
Verified Purchase
It went great
Works great
Dennis N - May 5, 2021
Verified Purchase
Was the exact replacement part needed
No fuss no muss, easily replaced
DAI WEI HOLLY L - June 11, 2019
Verified Purchase
Work as expected
The part ordered was received within one week, it worked as expected and the instruction video was helpful.
Paul F - November 17, 2022
Verified Purchase
Word well
Hardest part was ordering the part because we could not find the product number, but after two tries we received and installed the right part.
Dianne W - May 8, 2020
Verified Purchase
Element works well
Easy repair. We did it ourselves. It came quicker than anticipated in these difficult times. Thanks!
Doug B - April 11, 2020
Verified Purchase
Perfect fit.
The exact part ordered and needed. Fit like a glove. Installation was easy.
Alexandre C - March 16, 2020
Verified Purchase
Easy repair, great part
The part was in great condition and came fast.
Daniel C - January 15, 2021
Verified Purchase
Piece of cake
The oven element was quickly delivered and installed in 15 minutes. Totally satisfied. Thanks!
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Element burned up.
Removed old element and plugged in new. Very simple.
Other Parts Used:
-
Lynn from Denton, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
51 of 77 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Baking element got fried and turned into a pretzel with a crack in one loop
Cut power to your oven in your circuit breaker panel
Take out racks and bottom pan from the oven
Remove 2 screws in element bracket at back of oven
Lift element gently, tilt upward and pull towards you out of insulation
Get the tilted wire connectors clear of the back panel
Remove two wires from from connectors gently with your fingers
Take bad element out of oven
Replace it with new element
Replace everything else
Piece of cake. 20 minutes max: remove old; plug and play.
Take out racks and bottom pan from the oven
Remove 2 screws in element bracket at back of oven
Lift element gently, tilt upward and pull towards you out of insulation
Get the tilted wire connectors clear of the back panel
Remove two wires from from connectors gently with your fingers
Take bad element out of oven
Replace it with new element
Replace everything else
Piece of cake. 20 minutes max: remove old; plug and play.
Other Parts Used:
-
Edward D from GRAND BLANC, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element burnt out
Tool old elentment out, put new element in
Other Parts Used:
-
glyndon from BOWLING GREEN, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1992188
Manufacturer Part Number: 318254906
Manufacturer Part Number: 318254906
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST