Product Description
Refrigerator Ice Dispenser Lever Specifications
The dispenser lever releases ice or water when you press the lever.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not dispensing water
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR17X12125 replaces these:
AP3996165
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Joel D - July 28, 2019
Verified Purchase
easy repair
The part arrived sooner than expected and was easy to replace.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water not turning off; spring broken off of dispenser lever.
Replacement of Paddle Ice Disp Bk (#70) with Torsion Spring (#74) ---
Pry off bezel with putty knife. Remove control panel. Disconnect connectors. Unscrew (4x) plastic Housing. IMPORTANT: Funnel Ice Disp (#69) MUST be removed from Housing Shield Disp (#58) in order to rotate new part #70 to remove/install. May be tricky as stuck together with age and gunk. Note flat on axle of switch arm of #70; must rotate fully to remove/install part. Install new part with spring, and reassemble. NOTE: there are (at least) two types of bezels: one with spring tabs on the sides that must be felt and pushed in to remove without breaking, and another (mine) with rigid tabs on all sides that must be gently pried to pop out.
Pry off bezel with putty knife. Remove control panel. Disconnect connectors. Unscrew (4x) plastic Housing. IMPORTANT: Funnel Ice Disp (#69) MUST be removed from Housing Shield Disp (#58) in order to rotate new part #70 to remove/install. May be tricky as stuck together with age and gunk. Note flat on axle of switch arm of #70; must rotate fully to remove/install part. Install new part with spring, and reassemble. NOTE: there are (at least) two types of bezels: one with spring tabs on the sides that must be felt and pushed in to remove without breaking, and another (mine) with rigid tabs on all sides that must be gently pried to pop out.
Other Parts Used:
-
David from TOWSON, MD
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
5 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1483305
Manufacturer Part Number: WR17X12125
Manufacturer Part Number: WR17X12125
Brand
Model Number
Description