This dishwasher main and tactile board kit functions as the central control system for the appliance, managing all primary operations such as water intake, wash cycles, drying functions, timing, and user input. The kit combines the main electronic control board with the tactile interface, allowing cycle selections and commands from the control panel to be accurately processed and displayed. When these components begin to fail, common symptoms can include unresponsive buttons, cycles stopping mid-operation, failure to start, or erratic behavior during operation. Replacing the control board and touch interface together helps restore reliable communication between internal components, ensures proper cycle execution, and returns the dishwasher to consistent, dependable performance.
Average Repair Rating: 3.4 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher Wouldn't Start
The original problem was that the dishwasher wouldn't start or respond to any button presses. The Clean light stayed on consistently, but nothing else would happen.
I replaced the main board and control board, which really just involved taking apart the door, unplugging three wires, replacing the boards, then plugging the three wires back in.
After I did that and plugged everything back in, the Clean light flashed, and the dishwasher started beeping. It wouldn't respond to any controls, aside from the fact that pressing the Start button stopped the beeping.
Symptoms: - Just replaced Control Board - Clean light blinks - Start button stopped beeps - No other buttons did anything
Resolution: re-read the instructions that came with the board.
There's a step that says "Transfer model selector plug to the new control board". If you look on your old main board, right by the power connection is a plug that you're supposed to remove from the old board and put on the new board.
I had originally skimmed through the instructions thinking "this looks super easy", so I didn't look at it in detail until I had a problem.
Dishwasher works perfectly now.
Other Parts Used:
Jay from Rockford, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
46 of 52 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Power to the controls
I do a lot of home repairs but I never worked on an appliance before. I simply removed the six phillips screws holding the inside cover on and then no tools. I poped open the cover over the mother board that was burned due to a power spike, unplugged it and plugged up the new one and poped it all back together. In hind sight I should have disconnected the power underneath.
Other Parts Used:
Thomas from Leesburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not cycle from "wash", just kept running
As per instructions, any one that can read and use basic hand tools could do it. Very nice color instructions. BTW, this was an excellent value, $20 cheaper than two of the other parts houses I checked. Super fast shipping
Other Parts Used:
Mark from Burton, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
main control board malfunction
Diassembled the door from the insside and installed new board as instructions specified. Frustration is that this is the second time I have had to replace for the same dishwasher....
Other Parts Used:
Kenneth from Hudson, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
4 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit would not turn on
Changed the main chip. the unit then started and continuously ran. Thought something was wrong with it. It is just a cycle of the dishwasher and when the pump quit running the dishwasher ran and operates. Saved me lots of money and time.
Other Parts Used:
Donald from Harrison, AR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace keypad
Replaced keypad electronics PC boards.
Other Parts Used:
Richard from Turlock, CA
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Serge
January 15, 2018
Please send video how to remove and install
Hi Serge,Thank you for the question. Very sorry but we do not have a video for this part as of yet. Here a a repair store from a previous customer you may find helpful. "I simply removed the six phillips screws holding the inside cover on and then no tools. I poped open the cover over the mother board that was burned due to a power spike, unplugged it and plugged up the new one and poped it all back together. In hind sight I should have disconnected the power underneath." Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dan
July 28, 2021
Dishwasher will only drain upon unusual combinations of pressed control keys. The drain pump is fine and there are no obstructions. New circuit board needed?
For model number GLD4600N00WW
Hello Dan, Thank you for the question. Normally this is an indication the Main and Tactile Boards could be defective and need to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill
August 27, 2025
cycles through all phases of wash cycle but does not wash cycle.
For model number GLD4900P00CC
Hi Bill, thank you for contacting us. We would suggest checking the motor wash pump assembly, part number PS3652479. It is an essential component of the dishwashing cycle, propelling water through the spray arms for immaculate cleaning. You may need to replace it to fix the issue. We hope this sorts out your problem!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Dishwasher-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"WD21X10247","title":"WD21X10247","url":""}]
