Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bob S - February 8, 2024
Verified Purchase
Easy Repair to replace the Infinite Switch. Just followed Youtube instructions
The Infinite Switch for the front burner was exactly what I needed and everything works like new again.
★★★★★
★★★★★
Daniel H - February 12, 2020
Verified Purchase
Exactly the right part. Very fast delivery.
Part was perfect. Quick delivery.
★★★★★
★★★★★
Rajiv S - April 15, 2019
Verified Purchase
very quick delivery
right and quick delivery
★★★★★
★★★★★
Paul S - April 4, 2019
Verified Purchase
easy repair with OEM part
fast delivery of OEM part
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Poor heat control of the power boil element also would not shut down correctly
Remove and unplug the control panel. Remove four 1/4 in screws securing the metal panel to which the four rangetop controls are mounted. Unscrew the affected control, be careful to note the wiring layout on the control. Reassemble and test test out all functions.
Other Parts Used:
john from Woodstock, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left front bridge element would not heat
I removed the cooktop from the countertop and propped it up with 2 1x2's on each end. I removed the Torx screws that hold the glass in place. I set the glass aside. I then removed the screws holding the cover for the switches. I set the large central burner aside. I had to spray the screws holding the switch cover in place to loosen them. I then removed the defective left front switch and replaced the it with the GE Parts Select replacement switch. I then put everything back together. This Utube video was helpful although not my model number https://www.youtube.com/watch?v=tmcUqpHNj3Q
Other Parts Used:
Daniel from ATLANTA, GA
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jorge
January 17, 2023
The 8” element heats only on medium high or high
Could you please tell what could be wrong with it
Thank you
For model number JDP42S T1SS
Hi Jorge, thank you for reaching out. The element switch appears to be faulty and you may need to replace it with part number PS236751. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Our right front burner will turn on, briefly and then go off. The red light stays on 24/7 even with totally cold burners
For model number P S905S P3SS
Hello Beverly, thank you for the question. Based on the description that you have provided, we would recommend testing the heating element for continuity with a multimeter. If there is no continuity, replace it with part number PS2321567. We hope this helps.
Right front burner stays on even after know turned to off? Heat indicator light, thankfully stays on. Would this be the infinite control switch ? What part number?
For model number JSP42SN2SS
Hi MJ, thank you for contacting us. We have researched the model and would suggest checking the infinite switch, part number PS1481076. It turns the surface element on and off and controls how much heat the element produces. We hope this helps!
Was this helpful?
Thank you for voting!
Dave
October 15, 2019
One of the 4 red still warm lights stays on as well as the red warning indicator by the knob
When it has cooled down. Its for the left front burner
For model number jsp42sn1ss
Hello Dave, thank you for writing. This is most likely due to a faulty Indicator Light Module, part number PS1020690 for your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
WEI
February 27, 2020
Turn on the rear left infinite switch, the red "hot surface" light stays on, the "burner on" light stays off; turn off the infinite switch, the red "hot surface" light stays on and the burner stays on lower heating. Which one should i replace, this infinite switch or the module indicator light as part number: Ps8746160?
For model number JCSP46SR3SS
Hello, Thank you for your question. You will need to replace the switch itself for the burner, Typically if it is not functioning it will not heat up the element and indicate that it is on. We hope this helps.
Was this helpful?
Thank you for voting!
Richard
February 7, 2022
still warm lite stays on for triple burner
For model number pcs968dp2ww
Hello Richard, Thank you for your inquiry. We have researched the model number you have provided and it could be the switch, the element or the wiring. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1481076
Manufacturer Part Number: WB24T10134