This inlet valve assembly controls the flow of hot and cold water into your washer, ensuring the drum fills at the correct temperature during each cycle. Located at the back of the machine where the water hoses connect, it opens and closes as needed. If the valve is faulty, you may notice slow filling, no water flow, or water entering the drum when the washer is off. This genuine replacement part is sold individually and does not include supply hoses.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Water Filling Issues
This part works with the following products:
Washer.
This part works with the following products:
LG.
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michel S - May 27, 2022
Verified Purchase
Easy to repair fast shipping
Part took 15 min to replace , works great
★★★★★
★★★★★
Peter Earle B - August 4, 2025
Verified Purchase
All Good
Works well. Predict fit. Exactly as advertised. Fast shipping. A+++
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ricky
June 29, 2025
If water inlet valve is bad will it cause washer to over fill?
For model number WT7300CW
Hi Ricky, thank you for the question. Yes, a faulty water inlet valve can cause a washing machine to overfill. The valve is responsible for controlling the flow of water into the machine, and if it is not functioning correctly, it may not shut off when it is supposed to, leading to excess water. The water inlet valve for your model is part number PS12580369. We hope this solves your problem!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
February 3, 2024
The tub does not fill. The washing machine pressure switch failed the continuity test. It appears to remain open during the fill cycle. Applying air pressure does not change the switch from normally open to normally closed or vise-versa. However, no error codes are displayed. Also, when the power button is depressed, the "chimes" no longer respond. No sound.
For model number WT7100CW
Hello Michael, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the water level pressure switch, part number PS3529177, to solve the problem. You may also need to check the display PCB assembly, part number PS12590031. We hope that helps!
This washer has water leaking from the soap dispenser when the machine is not running, and even turned off. What part is bad or could it be an ring or something easy to fix?
For model number WT7100CW
Hi Joe, thank you for reaching out. Based on our understanding, the issue is most probably with the water inlet valve, part number PS12580369. You may need to replace it to fix the issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
February 5, 2024
When troubleshooting Water Inlet Valve, is it supplied by 12 volt DC or 120 volt AC?
For model number WT7100CW
Hello Michael, thank you for getting in touch. We have researched and found that the voltage for the solenoid of this water inlet valve is 12 volt DC. We hope this information helps!
Was this helpful?
Thank you for voting!
Michael
February 10, 2024
Replaced Water Pressure Switch and hose. Now the tub fills, but it overfills! However, if I blow into the pressure switch while tub is filling, the water shuts off. Great water pressure and all screens are clear. The air dome is not leaking and when air is blown into hose from the top, water bubbles in tub. Is it possible for the air dome to collect debris, which plugs the opening and fails to allow water to enter the hose and form pressure as tub fills? As long as I keep air pressure applied, the washer cycles.
For model number WT7100CW
Hi Michael, thank you for contacting us. Based on our understanding of the issue, we would suggest replacing the control board, part number PS12589962, to solve the problem. It manages the washer's functions such as filling, washing, draining and spinning. Glad to be of help!
Hello Robert, thank you for your question. Yes, this is the correct Inlet Valve for your model. We hope this helps.
Was this helpful?
Thank you for voting!
Jeanne Roy
November 6, 2025
Dose not stop filling with water
For model number Wt7100cw
Hello Jeanne, thank you for getting in touch. Check the water level switch, part number PS3529177. If the switch is faulty, the washer will either over fill or will not fill properly. Replace it to fix the issue. We hope this helps.
Water leaks from overflow port on top backside of tub is this this the bleach dispenser silinoid
For model number WT7305CW
Hi Kenneth, thank you for contacting us. Yes, the issue could be with the water inlet valve assembly, part number PS12580369. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Mukul
January 7, 2024
Water has started leaking in the tub. Some online forums suggest replacing the Solenoid valve.
1) is that correct?
2) is this the replacement part?
Thanks
Mukul
For model number WT7100CW
Hello Mukul, thank you for your inquiry. Yes, this issue is with the water inlet valve. We would recommend replacing the water inlet valve assembly, part number PS12580369. We hope that helps!
Was this helpful?
Thank you for voting!
Steve
January 24, 2024
I have constant IE codes, water pressure is good, inlet hoses are clear and fine, filter screens are clean and new… still getting fault code every cycle. Wondering if the inlet valve could be the problem? Are they known to clog or fault? Other ideas?
For model number WT7300CW
Hello Steve, thank you for your inquiry. We have researched and found that the error code IE indicates that the water supply is inadequate. Based on the description that you have provided, we would recommend checking the water inlet valve, part number PS12580369, to fix the issue. We hope this helps.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Washer
- Model Lg Wt7150cm.Abmetus 5.0 Cu. Ft. Top Load Energy Star Washer With Impeller, Turbodrum, Slamproof Glass Lid, And Water Plus – Common Parts And Diagrams
