If your fridge doors aren’t sealing properly or you’re noticing cold air escaping, this front plate assembly might be the fix. Also called a mullion or flipper, it fits between the French doors to keep the cold in and your food fresh. Made for select LG and Kenmore models, it’s built from sturdy plastic and helps your fridge run more efficiently. Just check your model number to make sure it’s the right fit.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chris F - November 24, 2024
Verified Purchase
Perfect fit. Easy repair.
Part came within shipping time expectations. Packaged well. Easy fix.
★★★★★
★★★★★
Wayne S - February 22, 2023
Verified Purchase
Very easy install
Item works great and it was shipped to me very fast. Plug and Play!
★★★★★
★★★★★
Charles S - May 18, 2021
Verified Purchase
Works well with LG fridge model LMX25988ST
The part has arrived within two days since ordered. Installation was pretty simple. The instructions were accurate. I noticed that the top end is slightly different than the original, but it worked fine. Actually it feels that opening and closing the door is much smoother.
★★★★★
★★★★★
Christine C - June 15, 2023
Verified Purchase
Very easy repair
This part arrived really fast and I was able to replace the broken piece in 5 minutes. This flapper fit the older model of fridge I have and is a better quality and designed piece. I have confidence that this part will not wear out and break like the original flapper did.
★★★★★
★★★★★
Bruno J - September 16, 2021
Verified Purchase
Perfect job with the right part!
Finding the part was easy; delivery was rocket fast; installation was a charm; thanks for your good service. I will be back!!!
★★★★★
★★★★★
Terry M - March 1, 2023
Verified Purchase
Flipper Plate
Part fitted perfectly. Very easy to install. Took about 5 minutes. Very pleased with this product.
★★★★★
★★★★★
LARRY S - July 21, 2021
Verified Purchase
P
Part came quickly and was correct. Great service!
★★★★★
★★★★★
Darryl R - March 14, 2021
Verified Purchase
Perfect replacement part,easily changed.
This part was slightly different then the original one, probably an updated version. Easily changed and works awesome.
★★★★★
★★★★★
Mathieu G - October 1, 2021
Verified Purchase
Easy install
Not exactly like original part but does the same job.
★★★★★
★★★★★
Wayne T - October 1, 2021
Verified Purchase
Easy repair
The part was easy to install and looks good.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 18 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My nephew accidentally forced the door closed last year, which resulted in the door having to be re closed manually folding back the flap. Ugh!
Unscered 2 screws, unplug electrical connection under the screws, slide her flap into grooves, realign screw holes , and rescrew in. Done.
Other Parts Used:
Tiziana from WARWICK, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
25 of 46 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Door Mullion Spring
Had to buy the entire door mullion because the spring broke, wasn't happy. Got the new part very quickly and it was a new replacement part number. Somewhat tentative. Took it out of the box and looked it over. No spring! Groan! Thought I got the wrong part. Flipped the bottom hinge and it snapped open, no need for a spring! Two screws, disconnect the wire harness, throw away the old, get new, connect the wire harness, connect hinges, put in two screws! Super easy. Watch the video for some pointers along the way.
Other Parts Used:
Maurice from SEATTLE, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
17 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken spring door million torn door gasket
Door million undid 2 screws in plug wire easy no need for directions. Gasket pull off old one fit New in with index finger no tools needed.
Watched a YouTube video on how to replace the door flipper (mullion). Very easy to unscrew the plate and disconnect the electrical circuit. Then gently slide up the flipper and replace with a new one.
Other Parts Used:
Patrick from AUGUSTA, WV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door gaskets bad and no ice
Replaced both gaskets on French style doors. Note: left and right gaskets are different part numbers. Had to remove flapper door to change the left gasket and all 3 wires on the flapper were broke. Replaced flapper door. Also found cover on top of the door hinge loose. Has a button on it that tells ice maker door is closed. Shuts off the water to the ice maker when door is open. Never knew that! Ice maker is now working again. P.S. gaskets are very easy to change. After removing 2 screws on flapper door, you need to tap it up in order to remove it.
The spring broke on the flapper (mullion) on my refrigerator. I sent a chat message to PartsSelect (they answered right away) to see if they had a replacement spring but it was not available so had to order the whole mullion. They gave me the part # I would have to order. It arrived quickly. The new mullion didn’t have a visible spring but it worked the same if not better. I just had to remove 2 screws on the center plate on the existing mullion, pull the plate out enough so you will be able to slide the mullion (the wires are under the plate kind of like the ones you see on a ceiling smoke detector) but you can’t get under the plate until you release the mullion. Push up on the mullion so that the plastic tabs on the top and bottom are released. Once the mullion is released (you have to hold it), you’ll see the wires. Unhook the wire part by just pushing down on the little tab and remove it. To install the new one, just reverse the steps. Align the top and bottom plastic tabs to fit into the slots, just enough to hold it in place. If the plastic tabs are not already flipped out, you’ll have to just flip them out. The top tab does not have tension but the bottom tab has tension so just push on it with your finger to flip it out. The plate covering the electrical is a rather tight fit and you have to make sure the little tab on the inside of the plate is above and behind the tab on the inside where the wires are so it slides behind it so you can get it in position before sliding the mullion back down into place and the electrical plate is in place too. Then screw the 2 screws back in. The hardest part is holding the mullion while un-attaching the electrical and just make sure you stuff the wires in enough so you can get the plate back in position. I’m a 75 yr old woman and managed fine by myself. At first when installing the new one, I couldn’t slide the mullion down enough to get the electrical plate in position and then realized I had to have the little tab inside the electrical plate behind the tab inside the wire compartment so they didn’t hit one another when pushing the mullion back down. Then, all went fine.
Other Parts Used:
Sonia from CALIF CITY, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plate Assembly Spring Broken
Remove 2 screws holding to door. Slide assembly up. Unplug connector. Remove old Plate Assembly. Do reverse to reinstall. Plug connector. Push in wires. Slide plate on. Fasten screws. Done
Other Parts Used:
Jim from WELLINGTON, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front Plate Assembly Not Closing Properly
Found the part on Parts Select. Ordered the part, which came quickly. While waiting for delivery. I watched a short video on how to replace this part. I'm a 73 yr. old female, and no trouble at all. I really felt a sense of accomplishment. Thank you Parts Select.
Other Parts Used:
Brenda from WEATHERFORD, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring on old mullion fell out
Replaced with new mullion
Other Parts Used:
MIKE from ATLANTA, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spring on the mullion door broke for the last time
This was an incredibly easy repair! 1 phillips screwdriver and two screws. Disconnect the small adapter, and you are good to go!
Other Parts Used:
Sonya from VAIL, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
15 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandra
November 21, 2021
Is the mullion flap suppose to open or stay flat when the door is closed? We installed a new one and the flap stays flat against the mullion. Thought it would have opened to seal the opening between the two doors.
For model number LFX25978st/00
Hello Sandra, thank you for writing. We have researched the model you have provided and have found a video for PS12374439. The video shows exact positioning for you. We hope to hear from you soon.
14 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Butch
July 20, 2021
What is the dimensions of the door latch.
For model number 7951033010
Hello Butch, Thank you for the question. The Front Plate is about 37" Long. We hope this helps!
3 peoplefound this helpful.
Was this helpful?
Thank you for voting!
James
October 14, 2021
The photo looks like this part has a gray colored front surface. Is there a version in white?
For model number LFX25978SW/00
Hello James, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11708993 for the White Flipper Assembly. We hope this helps!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Vivian
October 16, 2021
Do you know if this mullion will fit this 2 door, bottom freezer model with manufacturing date of 2013?
For model number 795.71033
Hello Vivian, Thank you for your inquiry. We have researched the partial model number you have provided and as there are two versions beginning with this model number, we show two different part numbers for the mullion. This mullion will fit model number 79571033010, and for model 79571033110 the part number for the mullion assembly is PS11708993. We do not receive the manufacturing dates from the manufacturer, so we would advise checking for the complete model number or checking with the serial number for the date. We hope this helps.
Looking to replace the door flapper. Can you confirm the correct part number?
For model number LG lfc25765sw /00
Hi Mark,
Thank you for your question. The part number listed under your model number for the door flipper assembly is PS11708993. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Dale
October 23, 2023
What is the part number for the door mullion for this model with stainless exterior
For model number LFX25778
Hello Dale, Thank you for your inquiry. Researching your model, we confirm that PS12374439 is the compatible stainless door mullion. We hope this helps
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Martie
January 31, 2024
Is the wire harness in the door mullion replaceable or do I need to buy the entire door flap?
For model number LFX25974ST
Hi Martie, thank you for reaching out. The wire harness in the flipper assembly does not come separately. You may need to order the complete flipper assembly, part number PS12374439. If you need help placing an order, customer service is open 7 days a week!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Jorge
June 6, 2024
One of the small white plastic holders on the left door, that hold the plate assembly at the top and bottom (the flapper door), where you slide the flapper door into for assembly from above, is broke. Is there 1) a name for this part? 2) is it replaceable 3) if unable to find, could a flathead screw go in there to hold the top of the flapper in place?
For model number LMX25986ST
Hi Jorge, thank you for reaching out. The part you are referring to is the mullion hinge mounting tab. It does not come separately. It comes as a part of the door assembly, part number PS8748970. You may need to replace the door assembly to fix the issue. We hope this helps!
Is it possible to get the 2 Mullion clips that are in the door? I replaced the mullion but the clips in the door are broken.
For model number Kenmore Elite 79571033010
Hi Bowman, thank you for reaching out. The clips you are referring to that hold the mullion comes with the door assembly. They do not come separately. You may need to replace the door assembly, part number PS3639026. We hope this solves your problem!
I need a replacement mullion/flapper.
Dimensions are: 37 inches x 2 inches
Stainless steel refrigerator
Thanks
For model number LG LFX25978ST/01
Hello Thomas, thank you for getting in touch. According to our research, the mullion or flipper assembly, part number PS12374439, is compatible with your model number. We hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
