Part Location Diagram of W11087376 Whirlpool Dishwasher Pump and Motor Assembly
See part 12 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Dishwasher Pump and Motor Assembly

★★★★★
★★★★★
1 Review
$378.06
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS12074533
Manufacturer Part Number W11087376
Manufactured by Whirlpool
Product Description

Dishwasher Pump and Motor Assembly Specifications

This pump and motor assembly are for dishwashers. Pump and motor assembly pumps water through the spray arms during the dishwashing cycle. Shut off the house circuit breaker for the dishwasher before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore.
Part# W11087376 replaces these:
W10917114
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

8 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bright
July 12, 2021
Hello I have a dishwasher that does not wash dishes. In fact when I open the door I see that the soap has dropped out of the soap dispenser and is just sitting in the washer. No cleaning. The repair guy told me something about a motor failure. If I purchased replaced the pump motor assembly unit, would that fix the problem or should I go for another smaller part? Where should I start?
For model number WDTA50SAHZ0
PartSelect logo
Hello Bright, Thank you for the question. This sounds like the Dishwasher Pump and Motor Assembly is not circulating the water up tot he spray arms allowing the water to spray onto the dishes to clean them. We hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Jason
September 16, 2019
The sprayers inside of my dishwasher aren't working, i've cleaned out the drains and it still does not work. What part would i need to get the sprayers working again?
For model number wdta5osahzo
PartSelect logo
Hello Jason, thank you for your question. We would recommend testing/replacing the diverter motor first, PartSelect Number PS5136127. The diverter motor moves the diverter disc into position so the disc can direct water through the upper spray arms. If the diverter motor is fine the issue could be the circulation pump PartSelect Number PS12070585. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Debbie
April 10, 2023
Dishwasher is 2 yrs. old. Water goes in but cycle hangs up after that and just sits there without water spraying around. No noise during this time. Able to drain water using the button on the front so that pump seems to be working.
For model number Whirlpool WDF520PADB7
PartSelect logo
Hi Debbie, thank you for reaching out. You may need to replace the circulation pump, part number PS16744934. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Frank
December 5, 2021
Kicks the breaker when plug into the power reception socket.
For model number 665.1454n711
PartSelect logo
Hello Frank , Thank you for your inquiry. A Kenmore dishwasher will trip your breaker when there is excessive current detected in the dishwasher’s circuits, usually caused by damaged wires or parts. Check the internal wiring for any visible damage or loose connections. We also recommend checking the door latch, the power cord, the heating element, the pump, and the control board. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Kael
April 1, 2023
Whirlpool dishwasher, Fills, drains and pumps water from side port during sanitation rinse but does not spin spray arms, I've already checked the arms and there are no blockages.
For model number WDT750SAHZ0
PartSelect logo
Hi Kael, thank you for reaching out. Based on the description that you have provided, we would recommend checking the pump motor, part number PS12070585, to solve the issue. We hope this sorts out your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Lori
September 9, 2023
Hello, I have a 3 yr old dishwasher that isn’t pumping water to any racks. Any idea what is wrong. Thanks
For model number WDT970SAHV0
PartSelect logo
Hello Lori, thank you for contacting us. We would suggest checking the spray arms for any clogging as with the passage of time they get clogged either by food waste or hard water remains. If this does not resolve your issue, then you may need to replace the circulation pump motor, part number PS12070585. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
Brian
October 25, 2022
Does the PS12074533 come with the pumps or is it just the sump?
For model number WDT750SAHZ0
PartSelect logo
Hello Brian, thank you for your question. The Part number PS12074533 comes with the pumps and the sump. We hope to hear from you soon.

Was this helpful?
Thank you for voting!
Todd
November 14, 2022
dishwasher will fill and drain but nothing is getting clean. seems to run through the entire cycle, even dispensing the dish tab, but nothing is spraying
For model number WDT750SAHZ0
PartSelect logo
Hello Todd, thank you for your inquiry. Please inspect the manifold, part number PS11753224, and make sure it is not blocked because it connects the spray arm to the water feed tube. Also, clean the orifices of all the spray arms to ensure that they are not clogged by debris. A defective water pump, part number PS12074533, can also cause this problem as it pumps water through the spray arms during the dishwashing cycle. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
;
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12074533
Manufacturer Part Number: W11087376
Brand
Model Number
Description
Kenmore
66513092N413
Dishwasher - Dishwasher
Kenmore
66513093N413
Dishwasher - Dishwasher
Kenmore
66513223N414
Dishwasher - Dishwasher
Kenmore
66513229N414
Dishwasher - Dishwasher
Kenmore
66513479N413
Dishwasher - Dishwasher
Kenmore
66513542N414
Dishwasher - Dishwasher
Kenmore
66513543N414
Dishwasher - Dishwasher
Kenmore
66513549N414
Dishwasher - Dishwasher
Kenmore
66514543N711
Dishwasher - Dishwasher
Kenmore
66514545N711
Dishwasher - Dishwasher
Kenmore
66514549N711
Dishwasher - Dishwasher
Kenmore
66514572N612
Dishwasher - Dishwasher
Kenmore
66514573N612
Dishwasher - Dishwasher
Kenmore
66514579N612
Dishwasher - Dishwasher
Whirlpool
WDT750SAHB0
Dishwasher - DISHWASHER
Whirlpool
WDT750SAHM0
Dishwasher - DISHWASHER
Whirlpool
WDT750SAHV0
Dishwasher - DISHWASHER
Whirlpool
WDT750SAHW0
Dishwasher - DISHWASHER
Whirlpool
WDT750SAHZ0
Dishwasher - DISHWASHER
Whirlpool
WDT970SAHB0
Dishwasher - DISHWASHER
Whirlpool
WDT970SAHV0
Dishwasher - DISHWASHER
Whirlpool
WDT970SAHW0
Dishwasher - DISHWASHER
Whirlpool
WDT970SAHZ0
Dishwasher - DISHWASHER
Whirlpool
WDTA50SAHB0
Dishwasher - DISHWASHER
Whirlpool
WDTA50SAHM0
Dishwasher - DISHWASHER
Whirlpool
WDTA50SAHN0
Whirlpool
WDTA50SAHV0
Dishwasher - DISHWASHER
Whirlpool
WDTA50SAHW0
Dishwasher - DISHWASHER
Whirlpool
WDTA50SAHZ0
Dishwasher - DISHWASHER
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service