Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
CABLE HARNESS 12014146
Fits your SHP65TL6UC!
$103.89
In Stock
Fits your SHP65TL6UC!
PartSelect Number
PS12072385
Manufacturer Part Number
12014146
Manufactured by
Bosch
Product Description
CABLE HARNESS Specifications
Keep your dishwasher running like new with this wire cable harness. It supplies power to the internal electrical parts, making sure everything works as it should. If your dishwasher isn’t powering up or has electrical problems, this part could be the fix. Designed for models without a water softener, it’s easy to install—just unplug the dishwasher, access the wiring, and replace the old harness. A simple solution for reliable performance.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Bosch, Thermador.
Part# 12014146 replaces these:
12008386
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Pet Rat chewed through wiring harness
It is important to remove the dishwasher to a workable space. Probably best to set it on a slightly higher platform, otherwise you're on the floor.
1. remove racks,
2. disconnect power supply and water line (turn off at source).
3. remove the exterior insulation.
4. One can now access the harness from both side of the washer.
5. Inspect and determine what connection goes where, all have color coded wire.Connections are notched
6. Recommend that each connection is removed and new connection replaced at that time
7.removing screws from the inside door to connect the harness to select connection.
7.button-up the door, replace insulation and reattach water line and power, reinstall machine.
8. You may have to remove the front toe-kick to access routing the wires.
1. remove racks,
2. disconnect power supply and water line (turn off at source).
3. remove the exterior insulation.
4. One can now access the harness from both side of the washer.
5. Inspect and determine what connection goes where, all have color coded wire.Connections are notched
6. Recommend that each connection is removed and new connection replaced at that time
7.removing screws from the inside door to connect the harness to select connection.
7.button-up the door, replace insulation and reattach water line and power, reinstall machine.
8. You may have to remove the front toe-kick to access routing the wires.
Other Parts Used:
-
Steve from ATASCADERO, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12072385
Manufacturer Part Number: 12014146
Manufacturer Part Number: 12014146
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST