Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Drip Pan Specifications
If you’ve found water on the floor or inside your refrigerator, the drip pan may be the culprit. This part sits under the evaporator coils and catches water that melts during defrosting, keeping it from leaking into unwanted areas. It’s designed to work with the heat from the compressor to help the water evaporate naturally. Replacing a cracked or missing drip pan is a simple way to prevent messes and keep your fridge running smoothly.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Maytag, KitchenAid, Jenn-Air.
Part# WPW10655368 replaces these:
AP6023629, W10215085, W10296785, W10655368, W10655369
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Marion W - October 12, 2022
Verified Purchase
Easy repair
The part came very fast and was in perfect condition. Thank you so much for your help.
Paul B - January 17, 2024
Verified Purchase
The part was exactly the right one.
I was a little worried that the part might not be exactly as shown. However it was the correct part, arrived quite fast and it went in as easy as pie.
Good thing I did the removal of the old part first as it was tricky to get out. Once out however it was much easier to install the new one as I knew how.
I tried to fix a leak in the old one with silicone but no go.
This replacement fixed the issue permanently.
Would highly recommend this company as I had zero issues.
Peter F - December 16, 2023
Verified Purchase
Exactly what I needed very easily installed.
The part was brand new and I received it quickly would definitely order again in the future.
Igor R - November 19, 2020
Verified Purchase
Good service.
The part came quickly, works as expected.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Drip pan in the back bottom was cracked during shipping and leaked
We had periodic leaks from under the Unit from new, could never figure out where it was coming from. Finally as it began to cause damage to surrounding cabinets, we took the back off and found the multiple cracks in the drip pan. Someone had hand trucked it from the wrong side! It was difficult to figure out the fan removal (it sits in the pan) but push the top forward and pull the bottom back and the fan came out. Then the pan was simple to remove / replace, by reversing the removal procedure, the fan was re installed.
Other Parts Used:
-
David from Traverse City, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
39 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pan is easy part, fan motor assembly is appliance orgami
Remove back cover
Remove drip thing from top to tray in the back
Remove fan motor assembly. This is squirrely. Top bends towards you, bottom pushes in to the unit. Not fun.
CAREFULLY remove copper tube that rests on drip tray
Remove tray - there are clips in the front that get released by screwdriver
Clean up
Replace new tray
Replace copper tube
Play with fan motor assembly till it fits. It doesn't look like it's gonna work until it does. See youtube videos on this.
Replace drip thing from top to tray - I forgot this one the first time.
Replace cover.
This is a simple, but squirrely, repair. Right on the border of easy (because so few tools and steps) and A Bit Difficult because of the patience required.
Remove drip thing from top to tray in the back
Remove fan motor assembly. This is squirrely. Top bends towards you, bottom pushes in to the unit. Not fun.
CAREFULLY remove copper tube that rests on drip tray
Remove tray - there are clips in the front that get released by screwdriver
Clean up
Replace new tray
Replace copper tube
Play with fan motor assembly till it fits. It doesn't look like it's gonna work until it does. See youtube videos on this.
Replace drip thing from top to tray - I forgot this one the first time.
Replace cover.
This is a simple, but squirrely, repair. Right on the border of easy (because so few tools and steps) and A Bit Difficult because of the patience required.
Other Parts Used:
-
Thomas from MELBOURNE, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11756974
Manufacturer Part Number: WPW10655368
Manufacturer Part Number: WPW10655368
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST