Dishwasher Pump and Motor Assembly

Hi Robert, Thank you for your question. There are a few parts that you may want to check to see if they are clean and working correctly. First you should check your filter and see if it is clean and not clogged up. The same with your spray arms. Take a look at the holes and make sure they are not clogged up. Then you should check your water inlet valve and see if that part is working correctly. You may also want to take a look at your turbidity sensor, and your motor pump as well. For the electrical parts you should be able to test them with a multi meter to see if they are working or not. Good luck with your repair.

Hello Ann and thanks for writing. First thing is to make sure there is not a problem with your door latch, if that is ok it most likely would have to be the pump and motor. We hope this helps. Please contact us anytime.

Hello Carla, thank you for your question. This is a genuine OEM Whirlpool part used on KitchenAid models. If you can provide the model number for the appliance you want to use it on, we can see if it is compatible or which one is. We look forward to hearing back from you.

Hi John, thank you for your question. Unfortunately we do not have a video for your part and appliance specifically. However we do have a video that shows how an installation like this usually goes. Here is the link: https://www.youtube.com/watch?v=0jgeiVB_YO4. You should be able to apply it to your own appliance. I hope that helps. Good luck with your repair.

Hello Jeff, thank you for your question. The first think you will want to do is clean out the filter, (FILTER Part Number: W10872845), as well as the spray arms on the unit. They could be clogged with debris that is being left on the unit during the rinse cycle. You may also want to check/replace the Turbidity Sensor Part Number: WPW10705575, which Measures level of soil in the water. I hope this helps!

Hello Adam, Thank you for the question. The Motor Pump, Part #: PS11773089 is #1 in the diagram and is just the Motor for the Pump. The Dishwasher Pump and Motor, Part #: PS11756692 #10 on the diagram is the Pump, Motor and the Sump, everything within the box of #10. We hope this helps!

Hello Adam, Thank you for contacting us. This would indicate the Circulation Pump PartSelect Number PS11773089 would need to be replaced. If there is no damage to the sump then it can be reused with the new Circulation Pump and Motor, however the full assembly with sump PartSelect Number PS11756692 is cheaper. We hope this helps!

Hello Saeid, thank you for reaching out. According to our research, the problem appears to be with the Pump and Motor Assembly and you may need to replace it, the part number is PS11756692. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Hello Richard, Thank you for the question. The Dishwasher Pump and Motor Assembly includes the Pump. We hope this helps, good luck with the repair!

Hi Ashley, thank you for your question. There is no fan or blower in your dishwasher. There are a couple of parts that generally cause this issue. The first being the heating element of your appliance. The second part to check would be your thermostat. If that part is fine then the issue might actually be in your electronic control board. I hope that helps. Good luck with your repair.