This part is see-through with a white frame. This lid is for washers.
Lid covers the washer tub opening.
Wear work gloves to protect your hands when installing this part.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# WPW10349235 replaces these:
AP6020096, W10289456, W10349235
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cracked lid
Remove 2 screws on each side of lid. Lift off lid from support pins. Slide new lid on support pins. Replace screws. NOTE: T-15 screw driver head required.
Other Parts Used:
Debra from SHERRILLS FRD, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
9 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charlie
August 3, 2017
How hard is it to install this item. Thanks.
For model number WTW7800XWO
Hi Charlie,
Thank you for your inquiry. It is generally a pretty easy repair to replace your lid with a new one. You will need a "Torx" T15 tip or driver. First and foremost when doing any type of appliance repair, unplug the unit or disconnect the power. Raise the lip and remove the two hinge pins that keep it in place using your Torx Driver. Remove the lid from the hinge pins and then replace it with your new one. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Gina
December 18, 2017
Does this lid come with new screws to install or do they need to be purchased separate? Thanks!
For model number WTW7800XW3
Hello Gina, Thank you for your inquiry. The screws come separately, part# WPW10078270. Good Luck!
5 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This lid hinge is a genuine OEM replacement part for your washing machine. This hinge is for the left side of your lid, although it is a good idea to replace btoh hinges at once. The hinge holds up the washing machine li...
