Selector Switch
Fits your 11022342510!
$130.85
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 11022342510!
PartSelect Number
PS11752017
Manufacturer Part Number
WPW10285511
Manufactured by
Whirlpool
Product Description
Selector Switch Specifications
Also known as a cycle switch.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Crosley.
Part# WPW10285511 replaces these:
W10285511
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Liz
March 18, 2018
When i start a load the machine will level and the red lights starts flashing it doesn't start makes a noise and the light will go off. After a few minutes it start to fill and then sit there. It may start to wash or it i press the on button it may or may not start. It is starts it will wash the clothes it will drain and fill to rinse and them sit. I have to change to spin and drain and them to drain and spin. What switch needs to be replaces.
For model number WTW4900AW0
Hello Liz, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: lid switch, water inlet valve, selector switch, and main control board. You can test the parts with a multimeter. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Judith
April 29, 2019
Is this a shift actuator or switcher? The machine stays on sensing mode...the lid lock works, I changed the capacitor and the electric panel behind the nob on top but an electrician said I needed a shift actuator" thank you...there is no picture on your site...i know what it looks like I've taken it out to check
For model number WTW4950XW3
Hello Judith, Thank you for the question. This is known as a cycle switch. The Shift Actuator is PartSelect Number: PS11747977. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Nic
October 3, 2019
My washing machine will do the wash cycle and rinse cycle, but does not always move to drain and spin cycles. Some times it will complete the full cycle and other times i will need to manually move the drain and spin cycle. Which part would i need to replace/fix to take care of this issue?Thank you in advance!
nic parker
For model number WTW5000DW1
Hello Nic, thank you for your question. It sounds like the timer control is not functioning properly. We would recommend checking the clutch and the actuator first, as those parts help change the washer from agitate to spin and drain. If those parts are ok, the control should be replaced which is PartSelect Number: PS12114296. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Leanne
November 4, 2019
Hi im after the load sensor do you have a part number please
For model number 3lmvwc400yw3
Hi Leanne, thank you for your question. That would be part of your main control board: PS8759376. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Earl
July 1, 2021
Is this switch the rinse cycle options
For model number mvwc416fw1
Hi Earl,
Thank you for your question. The part number listed under your model number for the rinse selector switch is PS11752018. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Casandra
July 26, 2021
My washer will not fill. When the machine is started it will begin filling and less than 1/4 of the way through it will stop and drain out. What is the problem?
For model number WTW4816FW0
Hello Casandra, Thank you for your inquiry. We would recommend checking your water inlet valve, the water pressure hose, and the control board. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Raymond
October 5, 2022
washer not filling with enough water when switch is set to full, water pours in for a little bit
For model number 11022242511
Hello Raymond, thank you for your question. We have researched your model and found that the issue is probably with the Water Inlet Valve, part number PS12349267. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
Jen
October 29, 2023
Washer will start, acts like it’s sensing. Start to fill the drain. No lights on the front panel and door doesn’t lock. Can use the drain and spin but anything that needs any kind of wash cycle doesn’t continue through. Where do we start?
For model number WTW4816FW2
Hi Jen, thank you for reaching out. Based on the description you have provided, it seems that there is an issue with the electronic control board, part number PS12348139. It manages the washer's functions such as filling, washing, draining and spinning. You may need to replace it to fix the issue. We hope this will resolve your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Jeffrey
March 25, 2024
Hello, My mwaterchine was not filling regardless of it being set on Deep water wash or Auto select. I purchased the water inlet valve and installed it today. I am still having the same issue. Any suggestions, if not, I'll purchase a new washing machine.
Thanks!
Jeff
For model number MVWC465HW0
Hello Jeffrey, thank you for the question. Based on the description that you have provided, we would recommend replacing the control board, part number PS12349434, to fix the issue. Good luck with the repair!
Was this helpful?
Thank you for voting!
Related Parts:
Glenn
May 15, 2019
No cold water only hot and how do i get to the repair
For model number mvwc300vw1
Hello Glenn, thank you for your question. We would recommend testing the temperature switch first, which is part number WPW10202616. If that tests ok, the issue would be with the water valve part number WPW10144820. There may be some installation videos on YouTube if you search the part numbers. I hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752017
Manufacturer Part Number: WPW10285511
Manufacturer Part Number: WPW10285511
Brand
Model Number
Description