11022442512 Kenmore Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Drive Hub Kit – Part Number: W10528947
$39.32
In Stock
Drive Hub Kit
★★★★★
★★★★★
(38)
Part #W10528947
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a simple DIY repair with easy-to-follow instructions and usually includes everything you need to get your washer working again.
Washing Machine Upper Agitator – Part Number: W10836692
$128.72
In Stock
Washing Machine Upper Agitator
★★★★★
★★★★★
(42)
Part #W10836692
This agitator is for washers. Agitator rotates back and forth to move the clothes inside the tub to clean the load. Unplug the washer before installing this part. Wear work gloves to protect your hands.
Water Inlet Valve – Part Number: W11210459
$101.64
In Stock
Water Inlet Valve
★★★★★
★★★★★
(23)
Part #W11210459
This water inlet valve is for washers. The water inlet valve controls the water flow into the washer. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
Washer Washer – Part Number: WP3949550
$17.26
In Stock
Washer Washer
★★★★★
★★★★★
(1)
Part #WP3949550
This part goes on the agitator retaining bolt.
Screw, 8-16 x 1.000 – Part Number: WP8533953
$9.85
In Stock
Screw, 8-16 x 1.000
Part #WP8533953
Sold individually.
Washer Sealtub – Part Number: W10324647
$90.28
In Stock
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Washplate Bolt – Part Number: W10772621
$11.61
In Stock
Washplate Bolt
Part #W10772621
Sold individually.
Washer D-Shaped Knob Insert – Part Number: WP8536939
$15.35
In Stock
Washer D-Shaped Knob Insert
Part #WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
DRIVE BLOCK RETAINER – Part Number: W11385424
$16.95
In Stock
DRIVE BLOCK RETAINER
Part #W11385424
Extension Hose – Part Number: 285863
$44.45
In Stock
Extension Hose
★★★★★
★★★★★
(3)
Part #285863
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.

Common Symptoms of the 11022442512

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hub had warn its grooved teeth off and washer wouldnt agitate
66 of 93 people found this instruction helpful.
  • Allison from RICHFORD, NY
  • Easy
  • 15 - 30 mins
  • Screw drivers
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
Was this helpful?
Thank you for voting!
Water would not fill the washer except for 4 inches.
38 of 52 people found this instruction helpful.
  • Patricia from MURPHYSBORO, IL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Once we put in the new Water Inlet Valve, the auto sensor works now and I can wash any size load
Was this helpful?
Thank you for voting!
Waher would not spin and made noise
25 of 29 people found this instruction helpful.
  • Andrew from SYLVANIA, OH
  • Very Easy
  • Less than 15 mins
  • Screw drivers, Wrench (Adjustable)
Removed center cap, loosened center nut, pry lightly up on center plate and tap center nut. Center plate comes loose, remove nut, remove center plate. Pry lock clip out and remove, remove screw with electric impact (screw drive will work, but slower), remove drive hub. Install new drive hub (be sure to check screw hole alignment), install and tighten screws (be sure to follow a skip pattern and bring it down even), install lock clip, install center plate, install and tighten nut, replace center cap. Done!
Was this helpful?
Thank you for voting!