This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 4 hrs and your part ships today!
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
$49.29
In Stock
Order within the next 4 hrs and your part ships today!
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly...
$35.94
In Stock
Order within the next 4 hrs and your part ships today!
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
$161.61
In Stock
Order within the next 4 hrs and your part ships today!
This suspension rod kit includes four rods that stabilize the wash tub, reducing vibrations and movement during cycles. It is compatible with a range of washing machines and helps improve performance ...
$113.97
In Stock
Order within the next 4 hrs and your part ships today!
If your washer is noisy, shaking, or leaving clothes wet, the drive block might need replacing. This part connects the basket to the drive shaft so it can spin properly during cycles. It’s built for l...
$30.13
In Stock
Order within the next 4 hrs and your part ships today!
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
$25.31
In Stock
Order within the next 4 hrs and your part ships today!
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
$106.65
In Stock
Order within the next 4 hrs and your part ships today!
Order within the next 4 hrs and your part ships today!
Questions And Answers for 1CWTW4815EW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charle
October 13, 2022
Need a drive motor pully not one that bolts on
For model number 1CWTW4815EW1
Hey Charle, thank you for your inquiry. We have researched your model and found that the drive motor pulley does not come separately. You may need to replace the drive motor, part number PS11757089. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
I have had this washer for some time. Today I put it on as usual by pressing the button, the green light comes on as usual but nothing happens. No water is coming into the tub. I checked the water inlet hose to make sure the line has water, I made sure the little latch on the lid is downwards but nothing. The green light I solid, it's not blinking.
For model number 1CWTW4815EW1
Hi Nigel, thank you for reaching out. The issue is probably due to the water inlet valve, part number PS12349268. We hope this helps!
Has
Clicking on wash cycle. would not go to rinse cycle
For model number 1CWTW4815EW1
Hello Hassan,
Thank you for your question. Our sources suggest replacing the control board under part PS12704684 for your model to fix the cycling issues. We hope this helps.
The washer won't drain water and think the drain pump failed. What is the part I should order to fix it. Live on a small island and repair people are not available so looking to correct on my own.
For model number 1CWTW4815EW1
Hi Emily, Thank you for asking. The Drain Pump for this model is listed as PartSelect #: PS11755183. Good luck with the repair!
my washer wont go pass rinse. I have tried setting knob to 12 o clock position, un plug, rotate knob 360 ccw. cw 3 clicks, ccw 1 click, cw 1 click.
all in less then 3 sec. I swear this worked once. but it does not work now.
For model number 1CWTW4815EW1
Hello John, Thank you for your inquiry. We have researched the model number you have provided and we would recommend checking the following parts to fix your issue: the door lock assembly, the water inlet valve, the cycle selector switch, the water pressure hose, and the control board. Check the hose for any visible damage or clogs, and examine the control board for any visible damage or loose connections. You can test the other parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair and if you need assistance with placing an order, please do not hesitate to call our customer service, open 7 days a week to help you. We look forward to hearing from you
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
