Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Dishwasher Upper Dishrack w/Middle Arm And Tube Specifications
This rack provides easy loading with flexibility for small and large items.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Dishwasher Dishwasher Upper Dishrack w/Middle Arm And Tube
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, KitchenAid, Whirlpool, Inglis.
Part# WPW10253040 replaces these:
AP6017900, 3377419, 3377423, 3377435, 3377448, 3377450, 3379709, 3379710, 3380648, 3380784, 3380949, 3380950, 3380951, 3380952, 3380953, 4172142, 8193784, 8193986, 8268837, 8519558
...
Show more
, 8519560, 8519562, 8519575, 8519586, 8519591, 8519613, 8539220, 8561728, 9744291, W10253040
Show less
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Elizabeth G - April 1, 2023
Verified Purchase
Suitable replacement.
The part fit easily. The wheels were in a slightly different spot so the upper rack does not pull all the way out, not too much of a problem, just a little different. The rack it self is slightly different, it is taking some adjustment on my part to learn the most efficient way to load the top rack. Over all, it was a good purchase.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 9 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Both dishracks needed to be replaced.
Assembled the lower dishrack as per the instructions provided and installed in the dishwasher.
The upper rack came with some spare parts but no instructions and I could not figure out what they were for or where they went so they remained just that, spare parts.
The upper rack came with some spare parts but no instructions and I could not figure out what they were for or where they went so they remained just that, spare parts.
Other Parts Used:
-
Lowell from Vero Beach, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
62 of 98 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The coating on the old racks had split causing rust
The new racks virtually slid right in! Very little work.
My dishwasher looks brand new! I should have ordered from you years ago!!!!
I am EXTREMELY satisfied, and will be back for more! I highly recommend PartSelect! The parts arrived quickly, and were a breeze to install.
THANKS!
My dishwasher looks brand new! I should have ordered from you years ago!!!!
I am EXTREMELY satisfied, and will be back for more! I highly recommend PartSelect! The parts arrived quickly, and were a breeze to install.
THANKS!
Other Parts Used:
-
MARY from COLUMBUS, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
27 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper nozzle "spinner" had degraded to the point where it no longer worked
The only difficult part was taking out (relatively easy) and returning (hard) the clips from the rails. This required bending the end of the metal rails with pliers. Otherwise the dishrack just rolled in with no issues.
The spinner is somewhat lower than the one it is replacing, making the clearance over items in the lower rack to be serviceable but marginal.
The spinner is somewhat lower than the one it is replacing, making the clearance over items in the lower rack to be serviceable but marginal.
Other Parts Used:
-
Brian from Socorro, NM
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
17 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacement old rusted racks and other broken parts
justed snaped the old bottom rack wheel off installed new that came with the rack .Same with the top and other parts.
Your service was great, even with back ordered parts, and delivery was timely after you received backorder.
Very Pleased and will use your service again.
Thank You.
Your service was great, even with back ordered parts, and delivery was timely after you received backorder.
Very Pleased and will use your service again.
Thank You.
Other Parts Used:
-
richard from norfolk, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
14 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishracks old and worn
Did not have to do any repair, the parts for the dishwasher come with all the necessary parts and no tools were necessary. the wheels were snapped into place for the lower rack and the upper rack should needed to be place in the sliders. The Middle arm holder is not necessary as it comes standard.
Other Parts Used:
-
saul from clarks summit, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
9 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Prongs on Upper and Lower Dish racks were rusted and broken.
I ordered the upper and lower rack replacements PLUS additional wheels and other attachments because I could not tell from the schematic on the website whether or not the smaller pieces came with the rack.
As it turned out, the racks came ready to install and all it took was a limber nephew to take out the old ones and put in the new. Now I have plenty of spare parts in my own inventory in case the wheels, etc. need replacing.
I feel guilty sending you this repair story because all I did was order the parts on your website and then conned my nephew into making the exchange.
The parts arrived very quickly and in good condition. In fact, the new racks are an improvement over the ones that came with the dishwasher originally. Ms. Susan McNutt was quite helpful in keeping me informed of the status of the part that was back-ordered. It was a pleasure dealing with PartSelect.com.
As it turned out, the racks came ready to install and all it took was a limber nephew to take out the old ones and put in the new. Now I have plenty of spare parts in my own inventory in case the wheels, etc. need replacing.
I feel guilty sending you this repair story because all I did was order the parts on your website and then conned my nephew into making the exchange.
The parts arrived very quickly and in good condition. In fact, the new racks are an improvement over the ones that came with the dishwasher originally. Ms. Susan McNutt was quite helpful in keeping me informed of the status of the part that was back-ordered. It was a pleasure dealing with PartSelect.com.
Other Parts Used:
-
Mary from Gladewater, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The coating on the upper rack had rust coming through.
Removed the plugs in the slides, removed the rack, slid the new rack in and replaced the plugs.
Other Parts Used:
-
Ernie from Salinas, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Melted rack
Replace previous rack.
Other Parts Used:
-
Shirley from FAIRFIELD TWP, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusting dishrack.
Removed old and replaced with new. However, my records show that I ordered the bottom rack and spray arm kit. Part Select sent the top rack with the spray arm attached. Rather than returning the parts, i used the top rack and put the spray arm kit into my household inventory. I may try again later for the lower rack.
Other Parts Used:
-
Stanley from Buffalo, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11751201
Manufacturer Part Number: WPW10253040
Manufacturer Part Number: WPW10253040
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST