
Water Supply Manifold Probe
$39.71
In Stock



Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS11748182
Manufacturer Part Number WPW10082831
Manufactured by
Whirlpool
Product Description
Water Supply Manifold Probe Specifications
Supplies water from the main water feed tube to the middle manifold water tube.

How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool, Maytag.
Part# WPW10082831 replaces these:
AP6014912, 8268328, 8268350, W10082831
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
November 8, 2017
I need the rubber stopper that covers the hole when you change the height of the upper rack. Does this piece include this?

Hi Dan,
Thank you for your question. This part does not include that. If you would like, you can resubmit your question with the model number of your appliance and we can try to help you find that part. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
February 5, 2018
The parts are not broken, but the spray arm is not spinning and glasses are not getting clean (upper rack)
For model number KUDC10FXSS6

Hi Ron, Thank you for the question. I suggest checking to make sure the spray arms are not clogged. They can get build up over time. You can also check to make sure the Water Supply Manifold Probe on the back feed tube is in place and not clogged. If everything looks good then it might be a defective Circulation Pump and Motor, PartSelect Number: PS11757388.The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
January 2, 2020
What is the orientation of the water supply manifold probe, that is does the part that sticks out in back have the triangle side to the top or the bottom of the dishwasher?
For model number KUDS35FXSS9

Hello Ron, Thank you for the question. I suggest watching the How to Video for further details. Hope this helps!
https://www.youtube.com/watch?v=W7nggBlG_gE&feature=emb_title
2 people found this helpful.
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 2.5 / 5.0, 2 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wheels were broken off the original upper rack assembly.
My husband and I are both very mechanical but found this repair confusing and difficult. No instructions on how to remove old parts and when I called service department was told parts had come from the manufacturer and they had no idea. Like a puzzle in reverse we finally were able to get the old parts off. The instructions for installing the new parts were confusing and the pictures blurred and not much help. I suspect they were poor photocopies from a service manual. That said, once we figured out how to install the first side the other side went smoothly and the repair was successful. The replacement parts are of substantially better quality (stainless steel) than the original plastic ones.
Other Parts Used:
-
Dianne from FALLON, NV
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
18 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm assembly broken
Had trouble finding my model dishwasher so i called Part Select and we were able to identify the same parts from a newer model. Repair was to replace the entire spray arm assembly, it went well with no problems.
Other Parts Used:
-
William P from Marsing, ID
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
11 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
David R - March 24, 2022

Great part. Timely delivery. Pricey
Part was as advertised. Resolved my issue. Cost way more than it should
Rona S - June 19, 2020

Part was perfect!
The part we ordered came quickly and fit perfectly, we're happy to have our dishwasher going again!
Kevin E - December 31, 2019

Easily the best Water Supply Manifold Probe I have ever purchased
It fixed the problem.
Eloise D - January 10, 2019

Perfect !
Everything as expected!
Tony K - December 3, 2018

Upper Sprayer not working.
This supply manifold had the little plastic protrusion broken off that prevents the silicone valve from closing. Part is otherwise durable... except for the protrusion. The plastic manifold alignment hanger breaks first, then this manifold breaks. Both were replaced for the repair.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748182
Manufacturer Part Number: WPW10082831
Manufacturer Part Number: WPW10082831
Brand
Model Number
Description
