Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Range Safety Valve And Regulator Assembly WP9755424
$359.31
In Stock
Does this part fit my model?
Need help finding your model number?PartSelect Number
PS11747161
Manufacturer Part Number
WP9755424
Manufactured by
Whirlpool
Product Description
Range Safety Valve And Regulator Assembly Specifications
The safety valve makes sure that no gas is released until the igniter gets enough power to ignite the gas range and the regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Little to no heat when baking
This part works with the following products:
Range.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP9755424 replaces these:
9751329, 9751331, 9752698, 9755424, 9781057
Customer Repair Stories
Average Repair Rating: 1.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven wouldn't light
My analysis was flawed. The $100 gas valve was acting erraticaly, so I replaced it. On a hunch, I took the top front off the stove and immediately saw a row of mini relays mounted on the $300 control board. The one labeled "bake" was black!
It is just too small for years of gas on / gas off high current. (The gas valve is indestructable. I took the old one apart. It's only a heater wire wrapped around a bimetalllic arm that lifts a soft pad off of the valve orfice.)
I removed the control board and desoldered the "bake" relay and the "light" relay. I cleaned up the bad "bake" relay contacts and swapped the two relays. Works fine. Better $100 mistake than a $300 control board. (Could have been $0, though.)
It is just too small for years of gas on / gas off high current. (The gas valve is indestructable. I took the old one apart. It's only a heater wire wrapped around a bimetalllic arm that lifts a soft pad off of the valve orfice.)
I removed the control board and desoldered the "bake" relay and the "light" relay. I cleaned up the bad "bake" relay contacts and swapped the two relays. Works fine. Better $100 mistake than a $300 control board. (Could have been $0, though.)
Other Parts Used:
-
james from downers grove, IL
-
Difficulty Level:Very Difficult
-
Total Repair Time:1- 2 hours
61 of 91 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747161
Manufacturer Part Number: WP9755424
Manufacturer Part Number: WP9755424
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST