If your washer won’t start or seems to struggle when turning on, this start capacitor might be the fix. It gives the motor a boost to get going and works with many Whirlpool and related brand models. Easy to install and a quick way to get your washer running again.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stephen R - March 23, 2021
Verified Purchase
It worked great
Overall I was happy with my order.
★★★★★
★★★★★
Claude G - July 27, 2019
Verified Purchase
easy repair with great part as exprcted
the part was in great condition and arrived in short time appliance is running fine
★★★★★
★★★★★
Larry H - July 14, 2020
Verified Purchase
Works perfect
old cap had rusted and one of the connects detached. Bing-bang-boom job to switch this new one in (once I found the actual problem of course). new part for old-can't complain.
★★★★★
★★★★★
Gaetan N - November 4, 2023
Verified Purchase
Capacitor non responsive to motor start up .
Part received and installed which solved the motor humming before start in between cycles . Capacitor mount broken but repaired with ty-wrap to back panel of washer . Thanks.
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carl
June 11, 2019
How do i test motor start capacitor?Motor will not do anything... hum, attempt to start.
machine fills, but won't agitate, drain or spin.
lid switch tests good.
For model number 110.92593210
Hello Carl, thank you for writing. You can test it with a multi-meter. If the needle on the multi-meter does not move then the Capacitor is faulty and should be replaced. From what you describe, you may want to consider the Direct Drive Motor Coupling part PS1485646 or the Clutch Assembly part PS334641. We hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
September 26, 2019
Is this part also known as the "lid switch"? My washer filled, but will not run through the cycle. I had the lid switch replaced ten months ago and the symptoms are pretty much the same. I think the part may have gone bad again. Thanks!
For model number LSQ9110PW4
Hi Donna,
Thank you for your question. This part is not the lid switch. The part number listed under your model number for the lid switch is PS11745957. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
May 23, 2023
KitchenAid Motor 3350418. I took the capacitor off without marking the location so I don't know where to put the wires back on the new one. Please help. Red wire & dbl white/white w/orange stripe
For model number KAWS677EQ0
Hi Joan, thank you for reaching out. According to our research, the wire orientation does not matter in the case of the capacitor. They can go either way. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Erik
February 16, 2025
My washer will not start. It just hums when I turn it on. I replaced the motor coupler and cleared the water pump (I removed a sock from the pump). Originally the washer stopped at the rinse cycle after filling and wouldn't move forward.
Could the capacitor be the issue now?
For model number 11024982300
Hello Erik, Thank you for writing. Yes, this can be an indication the Capacitor is faulty and may need to be replaced. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
December 6, 2025
Replaced the coupling and now machine will not start! Have power to washer!
For model number Lsn2000pw0
Hello Bob, thank you for contacting us. As you have already replaced the coupling, we would recommend checking the lid switch, part number PS11744858. A faulty lid switch acts as a safety lockout mechanism; if the control board does not receive a signal that the lid is closed, it will not power the motor. This prevents the washer from agitating or spinning, even if the unit has electrical power. You may need to replace it to fix the issue. We hope this solves your problem!
Hi washer fills to correct level then nothing happens push pull on all water features of timer works but none of other features of timer? I am thinking either timer or start capacitor? Thanks lid switch already bypassed all mechanical issues hav2 been changed thanks
For model number GSQ9669LW1
Hi Colin, thank you for contacting us. Based on our research, the issue is most probably with the timer, part number PS11742106. It controls most of the operations of the washer, such as water level, tub filling and emptying, length of cycles, and cycle setting sequences. You may need to replace it to fix the issue. Glad to be of help!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...