This can be used for either the bake igniter or broil igniter in your appliance. NOTE: The part may differ in appearance but will function the same as the original.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Will Not Start | Gas igniter glows | but will not light
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Greg H - September 1, 2023
Verified Purchase
Works at expected easy to install
Part came fast no issues.
★★★★★
★★★★★
Annie D - March 26, 2019
Verified Purchase
Perfect !
Fits perfectly !
★★★★★
★★★★★
Justin P - October 19, 2018
Verified Purchase
Easy repair
I work in the HVAC trade, use this site all the time for gas range parts, super easy, all I need is a model number. Parts shipped directly in 2-3 days.
★★★★★
★★★★★
Berry A - September 15, 2020
Verified Purchase
Easy repair
Part was easy to install, saved money and time.
★★★★★
★★★★★
Mark S - October 9, 2018
Verified Purchase
Correct part, prompt service.
Oven failed Saturday, same issue as before so I knew what the problem was, ordered Sunday morning, $25 dollars cheaper than dealer and I did not have to drive there to pick it up, issue with the online order that it would not accept my rural route address so I phoned in, customer service excellent in helping me, parts in my lane way Tuesday afternoon. Suggest to anyone to order parts!!!!!! Mark.
★★★★★
★★★★★
Darrell O - May 29, 2020
Verified Purchase
Installation Staightforward
It took two attempts to find the correct part for my range model but once correctly identified it shipped quickly.
★★★★★
★★★★★
Dave L - May 29, 2020
Verified Purchase
Really quick shipping, with great price!
Thank you. Part was exactly as identified. Arrived next day. Best price I could find.
★★★★★
★★★★★
Pedro P - February 9, 2026
Verified Purchase
welldone
it was the right part customer very happy
★★★★★
★★★★★
Philip Y - December 11, 2019
Verified Purchase
Plug N Play
Part came surprisingly fast. Within 24 hours of ordering. Came with the connector so no extra wiring work required. Looked exactly like the picture. It didn't come with the extra heat sheathing like the original but the wires itself is heat protected. I feel like a hero saving $ and able to fix something!
★★★★★
★★★★★
Robert T - July 13, 2020
Verified Purchase
The part worked well and it was easy to replace.
Replaced the part it was quick and easy to replace and performed according to specifications.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 21 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The broiler would work but the stove would not lite. I saw the igniter getting to a glow on the broiler and lite but the stove it would not so I figured the igniter might be shot.
1st I opened door to stove and removed the wire racks. Then removed lower panel to get to igniter. Then I had to slide stove away from wall. Remove panel on back for accesss to wires. The new part had a plastic connector and the original just used wire nuts for the connection. So I cut off connector and stripped 1/2 inch of the end. Removed wire nuts from old igniter. Back into the oven removed 2 screws pulled out old igniter. Installed new igniter with 2 screws stuck wires through small hole to rear. Back around to back of stove. Connected wires with wire nuts.(I did not see any differnce in wires and dont think it matters) put everything back together and fires that baby up. I am gonna say 15-30 min job
Other Parts Used:
Robert from plymouth, NH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
50 of 57 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas oven would not heat no flame. Broiler heated.
Unplug oven. Remove oven door. Two latches on hinges must be rotated towards the door to release and then remove. Remove two thumb screws that hold drip pan in place and remove from oven. The ignitor is then exposed. Remove the two screws that hold the ignitor onto the burner asymbley. Pull wires/connection plug through hole in back of oven. I used needle nose pliers to guide electrical plug through hole. Disconnect old ignitor and plug in new. Simply pull apart. There is a guide key that will ensure you install plug correctly. Reasymble in reverse order. Hardest part for me was getting the door back one.
Other Parts Used:
David from Port Orchard, WA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
18 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat, broiler and Self Clean would
I removed the two rear screws securing the bottom plate inside the oven. The ignitor visually was fine, however the wires internally must have frayed and was not connecting properly. I unscrewed the two screws securing the ignitor, disconnected the plug, then reconnected the new ignitor and things fired up immediately.
Other Parts Used:
Chris from Elmhurst, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
11 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven ignitor quit working.
I unscrewed the ignitor from the gas supply. Unplugged the ignitor. Plugged the new ignitor in and screwed it back in place to the gas supply. It could not have been easier!
Other Parts Used:
Pamela from Galeton, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would work
Replace the igniter. Removed 2 rear screws that secure bottom oven pan. Removed pan. Ignigter is located in center rear by 2 screws. Removed the screws and pulled ignigter out from rear. There us a prong connection that when pressed will release igniter. Don't touch new ignigter without gloves on. Will reduce life. Plugged in new ignigter and secured w 2 screws. Turned on oven to ensure problem was fixed. After 30 seconds, oven ignited. Replaced bottom oven pan. Tadaa!
Other Parts Used:
Laura from Bineland, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Would Not Light
Removed oven door, removed bottom of oven, removed old igniter, installed the new one and plugged it in in the back of the stove. Installed oven door and it works fine. .
Other Parts Used:
Jack from Wellsburg, IA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter failed to light oven
Installing new igniter was very easy. The problem I had was removing the screws. The range is 18 yrs old. The screws were stuck from yrs of use. Especially in the oven cover plate. I used w- d 40 it didn't work. I decided to take a 2" putty knife and push it under the screw head to release it and it worked. They came right out. The igniter screws were also difficult to get out. Once those were removed, I pulled the stove out, turned off the gas and the electrical plug, removed back plate unplugged the old igniter and connected the new one. Easy, peasy. Turned gas on etc. Tested the oven to be sure it worked. Turned oven off.Then put it all back the way it was. Done! The igniter install was simple and qiuck. The time problem was the screws.
Other Parts Used:
Phyllis from BROWNVILLE, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I needed a new igniter
I took the door off, then took the bottom out removed two screws, unplugged the old igniter and installed the new one. I turned on the oven and tested the new igniter and then replaced the bottom and oven door.
Other Parts Used:
Ted from BARNEGAT, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter failed (open circuit). Without the igniter properly working, the control board would not open the gas balance.
Removed the lower base pan of the oven by unscrewing two phillips head screws. I then had access to the old igniter and removed that by removing the mounting screws (2 Phillips head screws). Continuity test revealed an open circuit. I simply replaced the old part with the new part, reversed the process and the oven was ready for use in less than 10 minutes.
Other Parts Used:
Jay from PHILLIPSBURG, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would not light
removed inside bottom of oven, removed 2 screws that held the ignighter, pulled out the oven, removed one screw on small cover, unpluged old ignighter, removed old ignighter, pusned the wires through the back of the oven, plugged ity in, attached the nerw ignighter, and replaced the cover/ and the bottom of the oven. i teted the oven before i closed everything to insure it would light.
Other Parts Used:
Mark from Round Lake Beach, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
16 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jacob
December 29, 2017
My broiler will ignite but the oven will not. I am unsure if i need the horizontal or vertical mount igniter?
For model number MGR5755QDB
Hello Jacob, Thank you for your inquiry. The vertical mount ignitor is the oven ignitor that is mounted on the broil burner and controls the heat for the oven, the horizontal ignitor is also known as the bake/broil ignitor and is mounted on the bake ignitor. So if your broiler burner is working, we would recommend checking the horizontal ignitor first. Hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
January 9, 2018
Our oven pilot lights but the oven does not heat up. It stays at the 100 degree display
For model number GW399LXUB
Hi Linda,Thank you for the question. If the oven lights and turns on but can not reach the set temperature, I suggest testing the Short Oven Sensor Kit, PartSelect Number PS2003225.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
December 10, 2017
Oven ignitor begins glowing, after a minute or more the gas fire starts until it gets to temp. When temp drops about 30 or 40 degrees, the ignitor begins to glow, but gas does not start again until temp has dropped almost 100 degrees several minutes later. Tested the sensor and it ohm'd 1095 (supposed to be 1080 and is probably within range). I will next pull the ignitor and ohm it out. What is ohms rated on good ignitor?
For model number AGR5835QDB
Hi Tom,
Thank you for your question. The oven ignitor should have a resistance reading of 3.2 to 3.6 ohms. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Walter
July 23, 2017
The Amana range needs the igniter to be replaced. The range has a an oven at the bottom and a broil at the top. The oven does not ignite. I am not sure which part to buy as it is either Amana igniter wp7432p136 60 or Amana igniter 74007498. Please let me know.
For model number Amana agr5725sds
Hi Walter, Thank you for sending in your question. According to the model number the correct part number for the ovens bottom bake burner is WP7432P136-60 or our part number PS11744545.
I hope this help!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nick
February 4, 2020
Do i need to unplug the oven and turn off the gas to change out the oven igniter?
For model number MGR5755QDS
Hello Nick, thank you for your question. Yes, it is recommended the appliance be unplugged. The gas does not have to be turned off. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Daniel
February 25, 2020
My horizontal igniter model is 501a 7432p128-60 0402. It looks exactly like your wp7432p136-60 horizontal igniter. Will that part work as a replacement for me.
For model number MGR5765QDW
Hello and thank you for writing.
Yes, part number PS 11744545, should work for your unit as it is the replacement for your part number 7432p128-60 0402 which has been discontinued. We hope this information helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rebecca
August 10, 2023
When I turn the oven on, sometimes is preheats normally, but occasionally it just sits for 10 minutes and then suddenly ("whump!") it starts heating. Once it finally ignites, it bakes normally. Any suggestions?
For model number MGR5775QDQ
Hello Rebecca, thank you for your question! We have concluded that the issue is with the temperature sensor, part number PS2003225. We hope this information helps!
Hi Robert,
Thank you for contacting us. I would suggest first testing your oven sensor, to see if that part is working correctly. If it is, test your igniter as well. Both parts can be tested with a multi meter. I hope this helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
October 29, 2019
Your oven ignitor #ps11744545 say it replaces the Maytag 7432p131 60 but mine is
7432p128 60. Is it compatible?
For model number AGR5735QDB
Hello Richard, thank you for inquiring. Yes, this is the compatible replacement Horizontal Mount Igniter according to the parts list for your model range. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dan
September 5, 2017
Serial number ry0910076 Jenn-Air when i set it to bake it doesn't ignite, but does on broil. What part do i need?
For model number JGR8875RDS 1
Hello Dan, thank you for contacting us. Yes, this would be the correct part for that. The igniter would glow but not ignite the burner as it is not drawing enough power which prevents the gas valve from opening for safety. Hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
