Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Bake Element WP7406P043-60
Fits your CRE200!
$113.44
Special Order
Fits your CRE200!
PartSelect Number
PS11744511
Manufacturer Part Number
WP7406P043-60
Manufactured by
Whirlpool
Product Description
Bake Element Specifications
Struggling with an inefficient oven? We have the perfect solution for you. Say hello to our Whirlpool Oven Bake Heating Element. Designed to slot seamlessly into chosen models from Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef, this genuine OEM part is your trusted ally in regaining your oven's top-notch performance. Here's the crux: this heating element nests comfortably at the base of your oven. It's job? To pump out consistent heat for evenly baked food. Each cake you bake, every roast you make, all will be deliciously even and perfectly cooked'just like when your oven was brand new. Installation? A cinch, thanks to user-friendly push-on wire terminals. But remember, safety first. Disconnect the range or switch off the house circuit breaker for the range before starting. Pop on a pair of work gloves to keep those hands of yours safe. Just one last thing: to ensure successful installation and operation, please double-check that this part number matches your specific model. Confident, relaxed cooking is just a few simple steps away. Let's restore your oven to its former glory.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking
This part works with the following products:
Range, Microwave Oven Combo.
This part works with the following products:
Maytag, Hardwick.
Part# WP7406P043-60 replaces these:
AP6011315, 0E00103899, 0E00104899, 0E00105099, 5-50138, 550138, 7406P043-60, R0167041, Y0E00103899, Y0E00104899, Y0E00105099
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven element burnt out
First I removed the two screws that hold the element in place from inside the oven. Pulled the stove out , unplugged it and removed @ 6 screws that held the back on. Used pliers to pull off the slide-on connectors on the element. Removed old element.
Installed the new element through the oven, put the screws inside the oven to secure the element. Reconnected the wires on the back, replaced the rear covers on the oven, plugged the range in and slid it into place.
Tested oven and burnt off manufacturing oils.
Good to go.
Installed the new element through the oven, put the screws inside the oven to secure the element. Reconnected the wires on the back, replaced the rear covers on the oven, plugged the range in and slid it into place.
Tested oven and burnt off manufacturing oils.
Good to go.
Other Parts Used:
-
Raleigh from Snow Hill, MD
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old element split and burned out
simply unplug 220 volt plug fom wall for safety, remove back cover screws, remove each electrical lead at the back of range, open oven and remove the screw at each end of element and remove. reverse procedure to complete repair. very easy fix!
Other Parts Used:
-
Bob from ALEXANDRIA, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element burnt out
Unplugged stove for safety Removed screws from old element pulled element until connected wires were exposed. Detached old element and connected new one. Screwed it in place and done! Im a 33 year old woman this is one of the easiest fixes ive ever done.
Other Parts Used:
-
Jennifer from STANHOPE, IA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744511
Manufacturer Part Number: WP7406P043-60
Manufacturer Part Number: WP7406P043-60
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST