To release the knob, pull the tab at the backside of the timer.
This timer controls the operations of your washer: water level, length of cycles, and sequences. (60 Hz.)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Amana, Estate.
Part# WP3951166 replaces these:
AP6008901, 3951166
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Timer was bad.
I removed 4 screws holding the trim and timer mechanism.There is 1 phillips screw holding the timer to remove,and a plastic piece to pull out from the back of the timer.I easily pulled it off,and the timer fell right off.I removed the wiring harness,and removal was done.Installing the timer was a reversal of the process.Slide the timer in place.install 1 screw,snap wiring harness on.push timer dial on,shroud back in place and 4 screws to put back in. The whole process took me 15 minutes,and is a very simple fix.My wife was thrilled,and I was the hero!
Other Parts Used:
Gary from Maple Grove, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
12 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandy
October 22, 2021
The water has started filling very slow
For model number 11023032100
Hello Sandy, Thank you for the question. Normally a Slow Water Flow is due to a clogged or defective Water Inlet Valve. You can turn off the water supply and remove the hose from the valve to check the screens to see if they need to be cleaned. If not, you may need to replace the Valve. We hope this helps!
The black plastic piece that holds knob on with timer is broke can i order just that instead of the complete timer. The only thing happening is it wont drain water on rinse.
For model number LSR4100HQo
Hi Lois,
Thank you for your question. The shaft that the knob is on is not sold separately and is sold with the timer. I hope this helps. Thank you and have a great day!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Washer-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"WP3951166","title":"WP3951166","url":""}]
