With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to 190 degrees Fahrenheit. Differential of 60 degrees.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Dryer High Limit Thermostat
Troubleshooting
This part fixes the following symptoms:
Too hot
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, Roper, KitchenAid.
Part# WP3390291 replaces these:
AP6008306, 3390291, 696397
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mustapha E - April 29, 2023
Verified Purchase
Just the exact part
As I expected, the part was what I needed
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 23 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer blew cold air.
PartSelect is great for providing parts as requested. Unfortunately, neither of the 2 parts I ordered were on my machine. My bad for not looking at the actual part instead of the description. A word to the wise!
It was taking alomost twice as long for a load of clothes to dry.
First I had to take the back cover off. I removed the heating element and the thermostat and replaced them with the new repairs. It was relatively simple---any handiman could do it and would not require a repairman. We talked to a salesman at Sears to see what they thought the problem could be and then got on the internet. The best part was that the repairs came within a few days of placing my order. That was super!!! Thank you for your fast response.
Measured resistance on thermostats & heating element. Found thermostat open so ordered replacement part and heat again.
Other Parts Used:
Tom from Grove, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
35 of 42 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
Frist I looked on Parts Select site at there diagrams to figure out where the heating element was . After that it was easy to remove the back panel and expose the heating element box.The screw holding the element is a little hard to get too , but still easy to remove.You have to pull the box out a little to slide the element out. the only thing I did wrong was not buy both thermostates at the same time,and I had to spend a little more because the one part is not sold by itself. Over all a breeze
I followed the video offered by your website and it was very informative and right to the point. Was very brief and easy to follow. I ordered the parts before 10:00am and received the parts the next day with the regular shipping.Very good website others need to benchmark you. I will use your service for future repairs and refer you to others.
Removed the back of the dryer about 8 screws. Removed the Thermostat 250 F and replaced with new. Dries a load of clothes in one cycle on medium. Not bad for a 16 dollar part. I am a computer tech and I am used to taking computers a part but I think most people that are in anyway mechanically inclined and can look at a diagram could do this and save yourself a lot of money.
Other Parts Used:
Bryan from newington, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer not producing any heat
Removed rear panel after disconnecting the Power.Disconnected the fuse ,thermostat 250f, and replaced them. Then removed the old heater and installaled the new one. Then plugged in the heater and still no heat..So I have decided to replace cycling thermostat and temperature switch,which I ordered yesterday. These are the last two items that you suggest as being a cause.
Opened access door, noticed main power wire to heating element was partially melted. This was caused by a bad connection to the drying element, loose. Removed heating element assembly. Cut bad section of wire and added new connection. While doing this the thermostats plastic casing cap came off ! Probably due to exessive heat / resistance from the bad connection. This confirmed why there was no heat. Intalled new thermostat and and am now good to go !
Other Parts Used:
Phillip from Breinigsville, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer will not,dry clothes,but drum run
Took, back cover out,but first i disconect the electricity,i give a fast look,looking for anything wrong and i saw a thermostar burn out in the element case,the bottom one,a thermostart 250 f. but a did a search in the internet,and found that when a bottom thermostart burn out, the top one had to be change,so i did a continuity text in the top one and was open ,i have it,a used one, change and connect the dryer to the Electrical outlet and (walac)it start the dryer,problem solve
I am really not sure because my husband did the repair and it took him no time at all. I know he removed the back panel on the dryer, and the 2 parts were in plain site. He took the old off put on the new part. We turned the dryer on and it worked better than ever! This site is the best for home repairs. My husband was a little leary but we didn't want to buy a new dryer and we live in a remote area with no repair people, so for the low cost of these parts it was well worth it! Will diffently use this site again!!!!!!!!!!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JOHN
February 21, 2018
High temperature cut off thermostat from a Kenmore dryer. I measure 30 ohms across the terminals. Has it failed? The dryer doesn't seem to heat at all.
For model number 3390291
Hello John, thank you for your question. At room temperature, testing the thermostat should produce a reading of zero. If the reading is something else the thermostat is bad and would need to be replaced. If the appliance is running, but not heating at all (blowing cold air), it is most likely a thermostat issue, or fuse issue. If you could provide the model number of the appliance we can provide more information! I hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
April 27, 2018
I replaced the heating element, the thermal fuse and the high temperature thermostat and still have no heat. Does it matter which prong the red and white stripped go on the heating element and thermostat? Right now the striped one is on the bottom prong on the thermostat and on the prong closest to the drum on the element. Is that right?
For model number LEC6848AQ3
Hello Robert, Thank you for your inquiry. The red and white wire goes on the bottom and the solid red one should be on the top. The other parts to check would be the thermal cut off kit, the internal bias thermostat/cycling thermostat, the terminal and wire kit, the electrode/sensor, and the blower wheel. Also make sure the ducts are clear and your dryer has plenty of space in back to suck in air. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
August 16, 2019
My Whirlpool electric dryer seems to be overheating. I have replaced the thermal switch 3977394. it was open instead of n/c.
the other sensors measure a short or show continuity. i believe this is correct.
the dryer still seems to be getting too hot.
I have a laser thermometer. are there some readings i could measure?
how hot should a electric dryer get internally and the exhaust?
For model number LEN3434AW0
Hi Bob, The single most common reason why clothes dryer overheat is restricted airflow. When there's a blockage in the internal duct work, the hot air will become trapped inside the drum where it creates potential fire hazard. I am not sure of what is too hot, but on average a dryer should get 140-155°F on high , so too much higher would be an issue. But you could contact the manufacturer directly for more specific information. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ky
November 2, 2022
Press start to dry and it clicks and then nothing starts already replaced the thermal disconnect help it doesn’t start still
For model number MED9700SBO
Hello Ky, thank you for your inquiry. According to our research, we would recommend checking the following parts to fix your issue: The door Switch, part number PS334284, Drive Belt, part number PS11722115, and Thermostat, part number PS11746740. If you require assistance to place an order, please contact customer service. We hope that helps!
This kit includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse with a limit of 360 degrees Fahrenheit. The thermostat and fuse help prevent the dryer from overheating.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741441
Manufacturer Part Number: WP3390291
