Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Washer Lid Switch Kit Specifications
The point of the lid switch is for the tub to stop spinning when the washer lid is opened.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not drain | Will Not Start | Will not agitate
This part works with the following products:
Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, Maytag, Crosley.
Part# WP3355458 replaces these:
AP6008069, 3355458, WP3355458VP
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Richard L - September 18, 2020
Verified Purchase
Easy repair,part was an exact fit.No problems.
The part arrived incredibly fast and was an exact match to what I was replacing. I have used PartSelect a number of times and have always received the correct part.They are my first stop,always.
Mark T - October 9, 2018
Verified Purchase
We're washing clothes again.
We were very happy with the speed of the delivery and the part worked perfectly. Had to dig through the washer manual to find out how to release the spring clips for the lid but once we had that off it was a simple install. We saved $30 on the price quoted by a local supplier and we got it faster than they said they could.
Sandor H - April 28, 2020
Verified Purchase
Super easy repair
The part was perfect! Fast delivery! I'm very happy with my purchase!Thank you!!!
Thomas M - September 19, 2024
Verified Purchase
Exactly what was needed based on Partselect Q&A
Part was east to install. Was able to figure out the possible solutions for the problem based off of Partselect Q&A and discovered my lid switch was falling apart.
Saved money on my repairs because of it!
Keegan P - August 26, 2024
Verified Purchase
Perfect
Super straightforward repair, lightning fast shipping, great instructional video.
Cheryl T - July 17, 2020
Verified Purchase
Easy peasy
Super impressed how fast it came?? great service
Aleksandra B - July 30, 2020
Verified Purchase
Excellent service ????
We received part next day and it was easy repair. Thank you for excellent service
Ryan B - May 20, 2019
Verified Purchase
Right part, easy to install
^
Paul C - April 26, 2019
Verified Purchase
Exact replacement
Part receivednext day. Installed same with no issue. Washer was working with little or no downtime. Very satisfied with servicre
Mustapha E - October 1, 2021
Verified Purchase
Easy repair.
The part is brand new., easy to install and worked as expected.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 2.7 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer stopped before rinse cycle
My husband actually did the repairs all I know is he removed the lid, removed the old switch and put in the new one. My washer works now and thats all I care about. I thank you for having the part and at a reasonable cost we were able to repair our washer considering it is twin stackable and is over 10 years old.
Thanks again!!!!
Thanks again!!!!
Other Parts Used:
-
Pam from San Diego, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
74 of 180 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer failed to drain or spin
Diagnosis is the key. After reading that the 'open lid' switch could cause this problem I tested the switch by shorting it out (i.e. connected both sides of the switch) and setting the washer to 'Drain' after partially refilling the tub. The tub drained and the spin cycle started. Replaced the switch which is located underneath the top skin on the washing machine. Problem solved. The hardest part is the disassembly/assembly to get to the switch
Other Parts Used:
-
CRAIG from MONTAGUE, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741198
Manufacturer Part Number: WP3355458
Manufacturer Part Number: WP3355458
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST