This switch helps you control the heat on your stove’s 8-inch burner. If your burner isn’t heating up or won’t adjust properly, this part could be the fix. It works by sending the right amount of power to the burner when you turn the knob. It’s made to fit many models and is easy to install—just unplug your stove first and wear gloves for safety.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Range Infinite Switch - 8 Inch
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Oven is too hot
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Roper, KitchenAid, Estate.
Part# WP3148953 replaces these:
AP6007658, 3148953, WP3148953VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
17 Reviews
4.6
Filter By Rating:
5 Stars
12
4 Stars
3
3 Stars
2
2 Stars
0
1 Star
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lawrence S - October 31, 2021
Verified Purchase
Easy repair.
Fast delivery of the part, my appliance is back working again.
★★★★★
★★★★★
Rendel I - August 19, 2020
Verified Purchase
simple to install
installed in a few minutes and is working as needed.
★★★★★
★★★★★
Pat C - December 1, 2021
Verified Purchase
Great place to buy from !
Fast shipping ,easy to work with and helpful on phone.
★★★★★
★★★★★
Bonnie C - September 29, 2022
Verified Purchase
Front burner switch
The part was perfect. It's so nice to be able to use my front burner again and the service was excellent. Thank you so much.
★★★★★
★★★★★
Stephane B - January 15, 2020
Verified Purchase
Great!
Fast shipping, install part in less 15 mins and never overheat again. Thanks!
★★★★★
★★★★★
Vladimir S - April 15, 2020
Verified Purchase
Whirpool Range Easy Repair
Received the part fast and in good condition, it was easy to install a new switch.Thanks. Best Regards. Vladimir
★★★★★
★★★★★
Serge B - January 1, 2021
Verified Purchase
merci livraison tres rapide
tout fonctione tres bien
★★★★★
★★★★★
Don R - October 6, 2020
Verified Purchase
Easy fix
The part was shipped quickly, and the video made the replacement idiot proof.
★★★★★
★★★★★
Lynn J - January 27, 2021
Verified Purchase
Easily installed part
Easy as 1,2,3. Screws not included as you must have kept your screws from your old parts
★★★★★
★★★★★
Marvin M - June 25, 2021
Verified Purchase
Nice to have parts places like this in Canada.
The part was as I expected and my stove is like new again. Will definitely order again.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The burner would keep heating after turning off the switch
Start by turning off the power to the range. It was fairly easy to take the "Control Deck" off the top of the range by removing about 8 screws. I leaned the deck forward without removing any wires except a green ground that was held on by one of the screws. There are two small screws under the switch knob holding the Infinite Switch to the panel. I removed these and let the switch hang on the wires. To avoid missplacing or crossing the wires... I moved one wire at a time to the new switch, then attached the switch to the panel and put it all back together. Whole job was done in about 15 minutes
Other Parts Used:
RON from KAUFMAN, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
61 of 68 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would randomly overheat on any setting (Bad Control Switch)
1) Unplug stove. 2) Remove back cover of the stove held in place by 8 screws (4 short ones for the upper holes and 4 longer ones for the lower holes.). 3) Remove the knob from the switch that you are replacing to expose the switch mounting screws (2 screws). 4) Remove the screws. 5) Go to the rear of the stove and extract the defective switch. 6) You will see 2 plastic plugs going into/onto the switch. Remove the plugs. MAKE SURE YOU ARE UNPLUGGED FROM THE Wall OUTLET!! A small flat blade may be needed to separate the plugs from switch. 7) Attach the plugs to the new switch (there is only one way to do it. you wont get them confused and put on wrong. 8) Put the new switch where the defective one was. 9) Come to the front of the stove and put your two screws in and replace the knob. 10) Replace the back cover, 11) Plug in and test burner.
The 8-inch burner only heated on high regardless of the temperature setting dialed in.
Unplugged stove from electrical outlet. Pulled temperature control dial off by hand. Remove screws to top back stove panel with Phillips screwdriver. Removed top stove back panel. Unscrewed broken infinity switch from stove. Unclipped wiring harness to broken switch by prying loose with flat head screw driver. Reclipped wiring harness to new switch. Screwed replacement switch back onto stove. Reattached back panel with screws.
Other Parts Used:
Reginald from PLAINFIELD, IN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Infinite switch bad and receptacle heat damaged
Removed back plate, replaced infinite switch. Replaced receptacle holder. Took a moment to see how to install wires into the receptacle, no instructions on orientation of wires into the receptacle. Wired receptacle per instructions. Placed receptacle into holder and installed burner. Burner Burner would not lay flat, receptacle longer than original. Removed receptacle from holder, plugged in burner and placed burner into position.
Unscrewed the switches and let the switch hang while replacing one wire at a time. Followed instructions on wire replacement. Exact parts, only shaft on 6" switch was too long -- okay, because it is designed to break off a piece on end of shaft, then the knob fit. Everything was perfect.
Burner did not always reduce heat when temp. Was lowered.
My husband unscrewed the bad switch and replaced with the new one.
Other Parts Used:
Annie S from RIDGEVILLE, SC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Velma
September 12, 2017
The 8 inch burner comes on gets hot but wont turn down stays on high all the time, do i need a burner or the control
For model number RF110AXSQ3
Hello Velma, thank you for contacting us. You will need to replace the switch as this is what's causing this issue with the burner. Good luck with the repair!
24 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Ken
October 10, 2019
It is a Whirlpool. Does the 3149400 replace the 3148953 for the 8 inch element control?
For model number YIES350XW1
Hi Ken,
Thank you for your question. Part number 3149400 does not replace part number 3148953. The part number listed under your model number for the 8 inch burner switch is WP3148953, which replaces part number 3148953. I hope this helps. Thank you and have a great day!
4 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Stacey
February 7, 2019
The knob on my stove that goes to the front 8 in burner pops and sizzles and smells like wires are burning. What could be the problem? It heats up but afraid to use it with it making that noise. Any help would be appreciated. Thanks so much
For model number WFC150MOEBO
Hello Stacey, Thank you for the question. This sounds like the Switch behind the knob is defective and should be replaced.PartSelect Number PS11740775. Thank you for your inquiry, good luck with this repair!
3 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Rick Martin
January 26, 2020
Is this part number the same for large burner and small burners . Will it shut off my cooktop light indicator which stays on all the time . Thank you
For model number Wfc150moewo Electric range
Hello and thank you for writing.
Small 6 inch burner PS11740785
Large burner PS11740775. After installation of the new switch, we suggest to try a hard reset:
Go to your breaker box and shut the breakers for your unit off, wait 5 minutes and then turn the breaker to on again. That should hopefully clear this problem of the indicator light. We hope this helps. Please contact us anytime if you require further assistance.
The top left big burner gets to hot red hot at times can not turn down. What part do I need? Thank you.
For model number WFC150M0EB0
Hello Roger, Thank you for the question. This is an indication the Switch that controls the Element is defective and will need to be replaced, Part #: PS11740775. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 peoplefound this helpful.
Was this helpful?
Thank you for voting!
David
September 24, 2019
My 8" burner has no temperature control; when i turn it on, it is high only. I have researched that the element control switch needs to be replaced, but i have found two 8" switches for this model range. What is the difference between part# wp3149400 and wp3148953?
For model number ACR4303MFW
Hello David,
Thank you for your question. The correct switch for your model is under part WP3149400. Part wp3148953 is the same part, but this switch is not compatible to your model. Hope this helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Greg
January 6, 2020
The 8" front right burner gets warm, but will not glow red. It also will not get hot enough to boil water in a pot. Could it be the limiter, or perhaps the infinite switch?
For model number KERI203PWH3
Hello Greg, thank you for your question. The issue could be with either of those parts. We would recommend testing the switch first to determine the issue. Here is a link that will provide information on testing that part.
https://www.partselect.com/Range-Stove-Oven+Infinite-Switch-Testing+repair.htm
I hope this helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Carlos Hernandez
November 20, 2018
If i replace the switch that activates the burner, will the stove turn on? Cause only one burner burned. Not the all of them
For model number RF302BXDW0
Hello Carlos, Thank you for the question. If it is just the one burner not working then replacing the switch or the element should fix the issue. If none of the burners are working you may have more issues within the appliance. I suggest starting with the wiring for burn marks or defects. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Jai
November 14, 2021
Which infinite control switch do I need for bigger front left surface element and which surface element to replace bigger surface element?
For model number RF378LXPS
Hello Jai, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11747192 for the Large Control Switch and Part #: PS11764902 for the Element. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
if i have a orange dot infinite switch for the big burner on the the left would a green dot infinite switch work
For model number TES325KQ0
Hi Jordin, thank you for getting in touch. We have researched and found that the green dot infinite switch, part number PS11740775, fits your model. It is for the left front surface element. If you require assistance to place an order, please contact customer service!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
![](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11740785-1-S-Whirlpool-WP3149404-Infinite-Control-Switch-6-amp-quot.jpg "Infinite Control Switch, 6" – Part Number: WP3149404")
