Need help with your washing machine? You're in the right place. This is the genuine Whirlpool Air Tube for Tub Fill Volume - a perfect solution for select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. What does it do? Essentially, it links directly to the bottom of your tub to control the air pressure for the water-level pressure switch. This ensures that your washing machine operates at its best, restoring it to its original glory. Before making your purchase though, please ensure your model is compatible. When it comes to installation, remember safety first. We strongly suggest unplugging your washer and turning off the water supply beforehand, and don't forget to wear your work gloves to protect your hands. With this trustworthy Whirlpool part, you can solve your appliance issue confidently and get back to smoothly running household in no time.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Steve Q - October 29, 2020
Verified Purchase
Super fast shipping
Ordered it Sunday night had it on Tuesday... worked great. This is the 3rd time I’ve ordered parts... always happy with the outcome
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 7 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer would over fill the water
First I removed the front cover, then removed the two bolts that hold the top and lifted the top up to expose the wash tub the tube was on the back side replaced the tube, then removed the two screw that hold the front panel and replaced the level switch and attached the new tube.
This clothes washer is 35 years old and runs like a champ. I did notice a bit of water below the left rear and assumed that a hose was leaking. I let it go for about 6 months, until I could fit it into the "to-do" list. During that time, the hot/cold water intake valve died. I ordered the replacement hot/cold valve a month ago but noticed, upon removal of the valve, that there was significant water drip evidence around the electrical valve solenoids. The water drips caused the valve to die. Drips came from a clogged injector hose air break directly above the valve. Replaced all hoses and water level vacuum air line. Very easy process. The front drops off with two screws. The lid is off with two screws. All hoses easy to R/R. It took about 2 hours to complete. All replacement parts were perfect. My belts are fine so I'm ready for another 30 years of service.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
17 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water kept filling until overflow
removed back of control panel to find that a mouse chewed the air tube. tried to splice it with a barb connector, it did not work. Ordered part received it 2 days later and installed it. I would recommend buying parts from these folks!
Other Parts Used:
Michael from Woodside, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
16 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer wouldn't stop filling with water.
It should have been extremely easy, but it was a little difficult because my laundry room is very small and I had extremely limited space to work in and also had limited lighting. However, after taking many minutes to strategically plan how to maneuver in the tiny space, I was able to loosen the giant clamp on the hose inside the washer and attach the new hose! It worked like a charm! My 25 year old Maytag is working again! The part came in a bag certified as a genuine Whirlpool part and looked exactly like the old one! No complaints! The online installation videos are wonderful!
Other Parts Used:
Kimberly from GALLUP, NM
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Wrench (Adjustable)
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was overfilling from water level selected
Tried the water level control first. didn't fix it. Then replaced the air tube for tub fill volume.
The thing here is that it didn't have a hole in it nor was it blocked where you couldn't blow through it. The prolbem was that at the tub end it has a larger diameter and that was nearly filled with softener residue so it changed the air volume. That reduced air volume caused the air pressure to be wrong to the water level sensor. My most useful tool was a magnet mount flashligt inside the cabinet so I could see to get the hose back on.
Other Parts Used:
Jacob from SMITHFIELD, KY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not stop filling water
Replaced the air tube, existing one had been chewed by mice was easy to replace and solved the issue
Other Parts Used:
Ricky from OSWEGO, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water level Uncontrolled, Belts squeeking
Removed face of control panel, removed cover on back of machine that allows access to water level hose. Disconnected hot and cold water supply. Pulled old water level hose off tub. Had to use screw type hose clamps to install as diameter of hose different from original. Removed hoses from water inlet valve. Easily installed new valve. Tilted machine on it's face to access belts. Took five minutes to replace.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Homer
October 3, 2019
Water level is 3"-4" more than what the water level selected on push button control is. Selecting "large" water level the water will fill to approx. 1" below top of agitator top.
For model number LA482
Hello Homer, Thank you for the question. I suggest checking the Air Tube for Tub Fill Volume PartSelect Number PS11739292 for damage or blockage first. If the tube is good and secure, you can test the Water Level Switch PartSelect Number PS2017277 and the Water Inlet valve PartSelect Number PS1583805. Hope this helps!
Washer will not stop filling with water. So i replaced the 5-level rotary water pressure switch first. Connected all hoses and electricity and started washer. Result: Still would not stop filling with water. So i have ordered from your firm the air tube for tub fill volume. The only thing left on your trouble shooting list is the water inlet valve...which i can not find on your online listings...where is this
valve located on my machine and part number?????
For model number Maytag Washer LAT9316AAM
Hi John,
Thank you for your question. The water inlet valve would be located in the back of the washer near the top where the hoses attach to. When you are facing the washer from the front it would be on the back left side. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Carlos
January 28, 2019
Water will not fill. I already replaced the water inlet valve.
For model number lat9605AAE
Hi Carlos, thank you for your question. There are a couple of parts that you could check. This would be one of them. You would have to look for any tears or holes in the part that might make it not be working correctly. You may also want to check your lid switches to see if they are working as well. Another part to check would be your pressure switch. I hope that helps. Good luck with your repair.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/Washer-Hoses-and-Tubes.htm"},{"position":2,"name":"WP22001619","title":"WP22001619","url":""}]
