Refrigerator Fresh Food Door Gasket Specifications
This fresh food door gasket is white and made of rubber. It measures approximately thirty-one and a half inches wide by forty-one and a half inches long.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door Sweating | Fridge runs too long | Fridge too warm | Leaking
Average Repair Rating: 3.1 / 5.0, 20 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The Door Would Not Close All The Way
Bought a replacement gasket for the Refrigerator to solve the leaking air problem. After replacing the gasket, nothing changed, so it appears the problem is the door itself, so if you have a separation between in the gasket, be sure it's the gasket and not the door itself.
Other Parts Used:
Solomon from Irving, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
38 of 47 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Faulty Refirgerator door Gasket (Leaking)
First I went on line and found detailed instructions how to do it. I also covered the frig with a large piece of card board to keep the "cool" in to some degree. I put the new gasket in a tub of hot water. I unloaded the door. Loosed all the screws..pulled off old gasket/seal.... carefully put the new one on the door. This was tedious but okay. then I tightend the screws. Closed teh door...made adjustments ..leveled the refrigerator... checked for leaks by putting a flashlight in the frig and closing the door. I also used a dryer to help the seal form easier. awesome! Like a new refrigerator.
Other Parts Used:
Robert from Woodstock, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
28 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door seal gasket was torn and needed replacement.
First I read other repair stories which really helped. I decided to leave the door on and use a 1/4" nutdriver plus a flat blade screwdriver. I loosed the screws on one side at a time. I pulled off the old seal and replaced with the new, using the flat blade to help tuck the seal in as needed. I also had to use a hair dryer to soften the new seal at some places in order to form it properly. Overall, I had great success!
Other Parts Used:
William from Brooklyn, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
15 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door gasket deformed
Step 1: Removed door because I wanted to change the opening from left to right. Step 2: Place door on 2 saw horses and remove gasket with a nut driver. Step 3: Install new gasket. Step 4: Reinstall refrigerator and freezer doors.
I found this proceedure to be one of the easiest I have ever accomplished.
Other Parts Used:
Ted from Eatonville, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
15 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Gaskets Cracked
Unscrewed the old gasket (took off about 24 screws) and screwed in the new gasket. Be careful as the entire door shelf comes off when all the screws come out. Have someone hold the shelf so it won't fall during gasket removal and install.
Fridge Gasket - heated the gasket with hairdrier to reform shape from shipping. Tried loostening nuts all around, but when installing the top part first, had to remove the nuts in order to have sufficient space to install gasket. Then tightened top nuts, and proceeded to install side parts, removing the nuts as I went down. Once about half down, was able to finish installation without removing any more nuts - loosening was enough. Freezer tray - just slide it in. The only concern was the part deminsions were not correct. They showed the tray to be about 15", while my old tray was about 12". But when the tray arrived I was thankful that the new one matched the old one - 12". The diragram needs to be corrected. Icemaker tube - no problems.
I removed everything from the door, and unscrewed all of the nuts. I left the door on the refrigerator, mainly because I didn't think I needed to remove it. The gasket can be put on with the door attached, but I can see where it would be easier to take the whole door off. It would be easier to position the gasket laying down. All in all, the repair went fine and the door seals much better.
Other Parts Used:
WILLIAM from VERONA, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Gasket was deformed and did not fit properly.
1. I removed all screws holding the old gasket.
2. I removed the old gasket.
3. I removed and unfolded the new gasket from the shipping package.
4. I used a hair dryer to heat and straighten the gasket.
5. I installed the new gasket and secured it with the screws.
6. Some gasket deformation still remained, so I used the hair dryer again the next day to heat the gasket. Adding a small piece of cardboard behind the gasket also helped to restore the gasket shape.
Other Parts Used:
Ralph from Lexington, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace old door gasket
Star at the the right hand corner of door, loosen the screws, pull the old gasket out and at the same point push the new gasket,, tight all the screws chek for any air leaks ...problem solved.
Other Parts Used:
Guillermo from Brecksville, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
6 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Seal was balling up at bottom of doors and frig was not shutting
First placed the gasket in warm water so it would easily stretch over the door. Took off the inside front door cover and placed gasket on (magnet side out) then placed gasket on door and reattached. Works great and your prices and time of delivery were wonderful. Thanks
Other Parts Used:
Debra from Newnan, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
September 27, 2017
I need both seals freezer and fridge does this part(s) cover the bases
For model number TP22R3L
Hi Joe,
Thank you for your inquiry. The gaskets for the refrigerator and freezer sections have different part numbers. The part number for the refrigerator door gasket is PS11738523 and the part number for the freezer door gasket is PS11738524. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
David
September 26, 2019
Water is accumulating under the two crispers, and droplets hang from the roof of the fridge compartment. This water has to be removed daily, and i wish to know whether a leaking gasket on the fridge door is contributing to the water build-up.
For model number DRT2102AW (Amana Distinctions)
Hi David, it is possible this is caused by a faulty gasket or even bent fridge door hinge. There could also be leaking water lines. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mahmoud
July 16, 2019
Hi,
I need both fridge and freezer door gasket for this model.What would be the part # ?
For model number Amana TXI21A3W
Hello Mahmoud, thank you for inquiring. For your model the Freezer Door Gasket is part PS11738524 and the Refrigerator Door Gasket is this part PS11738523.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
September 30, 2021
The model number is for Amana Refrigerator. I need to replace the door gasket on the refrigerator section. What will work? Thank you, Joan
For model number TQ1BR2W
Hello Joan, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738521. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I need gaskets for the refrigerator door and the freezer compartment
For model number TX121RL
Hello Charles, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11738523 for the White Fresh Food Door Gasket. The Freezer Gasket PartSelect Number PS2007704 is showing to be discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
Was this helpful?
Thank you for voting!
Ahmed
December 6, 2025
Need fresh food gasket or door seal, it's has much of water dripping from fridge roof.
For model number TR21V2W
Hi Ahmed, thank you for reaching out. The fresh food door gasket for your model is part number PS11738523. Replacing it might help resolve the issue, as a faulty seal allows warm, moist air to enter the cold interior, leading to excessive condensation that can accumulate and drip. We hope this helps.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Refrigerator-Seals-and-Gaskets.htm"},{"position":2,"name":"WP12550111Q","title":"WP12550111Q","url":""}]
