PUMP-DRAIN 00631200

Hello Steve, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10061173 for the sump. Hope this helps!

Hi Alexander, thank you for contacting us. The error code E24 is a drain error code, although it can be triggered by a circulation pump or main control issue. The first thing to check is your drainage system, make sure the filters are not plugged in and the check valve is in place. Your check valve is located at the bottom of your tub on the side wall, which is generally white in color. If those two things are looking good, check your drain hose. Is it kinked or clogged? (Did you just replace your garbage disposal? If you answered yes, remove the plastic plug that comes with the new disposal.) The next thing to check is your drain pump. When you press cancel, can you hear a humming noise? If not, you will need to check for power to the drain pump, there should be 120 volts. If all the items in your drain system test OK but you are still getting the code, the next step will require you to remove the dishwasher from the cabinet. After the dishwasher has been removed from the cabinet, you will need to get to the main control on the lower right side. Make sure the breaker is turned off for the dishwasher at this time. Remove the connector with the three grey and three black wires. You are looking for 89 ohms on the grey wires going to the drain pump, and 14 ohms across the black wires going to the circulation pump, part number PS11724988. If both check out, you will need to replace the main control, part number PS8737008. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.

Hello Tom, thank you for writing. There are two pumps. The pump that was recommended is the Drain Pump PartSelect Number PS11704799. The other is Circulation Pump with Heater PartSelect Number PS11724988. Circulation pump with heater moves heated water through the spray arm to clean the dishes. Good luck with your repair.

Hello Sanford, Thank you for your inquiry. If you have already checked the hoses and filter, then the issue is most likely the drain pump and the correct part number would be PS11704799. We hope this helps.

Hello Teresa, Thank you for writing. One of the common issues with a faulty Drain Pump can be a loud humming sound. We hope this solves your problem!

Hello Joe, thank you for reaching out. If you have checked obstructions and clogs, you will need to replace the drain pump, part number PS8728607, to fix the issue. We hope this helps.

Hello Joel, thank you for your question. The E15 error means water is getting on the bottom of your dishwasher. To reset this error, unplug or turn off the breaker to your dishwasher, pull the dishwasher out from the cabinet, either use a rag or sponge to remove the water. Check for any leaks. We hope this helps.

Hi Susan, Thank you for your question. The part number listed under your model number for the drain pump is PS11704799. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Hi Seth, Thank you for your question. If your dishwasher stops mid-cycle, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door lock and switches, the electronic control board, the control panel and the circulation pump assembly with heater. We have included a link that you may reference on how to check these parts. We hope this helps! Good luck with the repair!

Hello John, thank you for your inquiry. The E15 code indicates a drain issue. If you have already checked the hoses and cleaned the line, then the issue is most likely the drain pump and the part number would be PS11704799. We hope this helps.