Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Iran
January 9, 2019
I have Kenmore double wall oven. The top oven self clean option does not work. When i set it to self clean the door locks but the oven does, reach a cleaning temperature. The oven does work on other temperatures, it reaches a broil temperature but not self clean.
Hello Iran, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nancy
January 19, 2024
My Frigidaire oven temperature is inconsistent...sometimes not coming up to set temperature after very long pre-heat; sometimes it almost comes to temp. Temperature range is erratic.
For model number FPES3085KFF
Hello Nancy, thank you for getting in touch. According to our understanding, the issue is most probably with the temperature sensor, part number PS16745361. It measures the oven temperature. It also allows the oven to maintain the set temperature by sensing the temperature and sending the information to the control board. We would recommend replacing it to solve the problem. Glad to be of help!
I am getting code f15 when i turn oven on i been told is the limit thermostat, my serial number is cpcs3085lf without a or b at the end is that same thing.
Thank you
For model number CPCS3085LFA
Hello Astrit, thank you for your inquiry. We have researched and found that the error code F15 indicates a problem with the control board. We would recommend checking the control board, part number PS2368654, to solve the problem. Glad to be of assistance!
My warmer drawer does not get particularly warm if at all. Are there tests for thermostat and heating coil?
For model number FPGS3085PFA
Hello Dan, thank you for reaching out. According to our research, a continuity test will be used to check the working of both parts. A multimeter will be used to check the continuity of both parts. To check the thermostat, part number PS1151267, select the lowest possible setting of ohms on the multimeter and eliminate the error. Connect probes to the terminals of the thermostat. A working thermostat should read between 0 and 1 ohm. To test the heating element, part number PS2332962, connect the probes to the terminals of the heating element. A heating element should show a reading between 10 and 100 ohms. After performing the continuity test, we recommend you replace the faulty part to fix the issue. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
