See part F54B in the diagram
( Grid squares measure 1x1 inch )
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
Dual Element Control with Potentiometer Specifications
Do you need to fine-tune the heat and power control of your stove's surface element? You're in the right place! The Frigidaire Dual Element Control with Potentiometer is precisely the item that can help. This authentic replacement part is engineered to breathe new life into your range and get it performing efficiently and effectively, just like when it was brand new. A unique feature of this part is its integrated display board, serving as a constant status checker for your surface element. Knowledge is power, and this component ensures that you're always aware of your appliance's operation. Remember, your safety is paramount. Before installing the Dual Element Control with Potentiometer, always disconnect your range from its power source, and consider wearing work gloves to shield your hands. This product is specifically manufactured to mesh seamlessly with selected models from Frigidaire, Electrolux, White Westinghouse, and Tappan. By utilizing this genuine OEM part, you're not just fixing a temporary problem but investing in the long-term health and performance of your range. Choose the Frigidaire Dual Element Control with Potentiometer, and enjoy a more efficient and controlled cooking experience!
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire.
Part# 316441804 replaces these:
AP3874713, 1163630, 316441804K
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Nilo S - May 18, 2019
Verified Purchase
Great parts replacement.
The parts was good and worked fine. I made my wife smile again.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken left front dual-element potentiometer (switch)
1. Cut Power
2. Remove knobs
3. Remove 4 large hex nut with 1-1/8" socket
4. Rotate panel on to stove top (place a towel first) . Watch for top seal (at the top of the panel). This needs to be put back in place (easy).
5. Remove nut on switch holding the module (my was broken)
5. Remove 6 inner panel screws (philips)
6 Guide broke switch module clear of inner panel
7. Swap wires and connectors.
8. Place new module into postion tighten nut while supporting module (hand tight then another flat. I used a socket so the switch stem could protrude, and a pair of channel locks)
9. Re-assemble, making sure to position the top seal correctly.
10. Power-up & check out.
The apppliance store wanted over $150 to install it. But I could do it myself.
Some confusion on which part to order as the diagrams for the potentiometers show 3/1 configuration and indicated the front right potentiometer being different. My unit has 2/2 configuration (Front 2 large, Back 2 small) all dual-element. The diagram points to the front left as being different.
Even the local appliance store wasn't sure which to order and had to send a fax to find out (which came back talking about a 3/1 configuration).
I ordered the right front because I assumed it was for the higher wattage. I got the box and it was stamped "left front". Double check the boards and both looked identical
The whole process went smooth, part came in a couple of days after ordering.
2. Remove knobs
3. Remove 4 large hex nut with 1-1/8" socket
4. Rotate panel on to stove top (place a towel first) . Watch for top seal (at the top of the panel). This needs to be put back in place (easy).
5. Remove nut on switch holding the module (my was broken)
5. Remove 6 inner panel screws (philips)
6 Guide broke switch module clear of inner panel
7. Swap wires and connectors.
8. Place new module into postion tighten nut while supporting module (hand tight then another flat. I used a socket so the switch stem could protrude, and a pair of channel locks)
9. Re-assemble, making sure to position the top seal correctly.
10. Power-up & check out.
The apppliance store wanted over $150 to install it. But I could do it myself.
Some confusion on which part to order as the diagrams for the potentiometers show 3/1 configuration and indicated the front right potentiometer being different. My unit has 2/2 configuration (Front 2 large, Back 2 small) all dual-element. The diagram points to the front left as being different.
Even the local appliance store wasn't sure which to order and had to send a fax to find out (which came back talking about a 3/1 configuration).
I ordered the right front because I assumed it was for the higher wattage. I got the box and it was stamped "left front". Double check the boards and both looked identical
The whole process went smooth, part came in a couple of days after ordering.
Other Parts Used:
-
Michael from Boynton Beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
39 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
$349.71
In Stock
Dual Element Control with Potentiometer
$349.71
PartSelect Number: PS1149759
Picture your stove, oven, or range back in tip-top shape with the Frigidaire Dual Element Control with Potentiometer. This authentic OEM part, crafted with an aim for reliability, has one major job - to regulate the heat... 
$27.28
In Stock
Produce Preserver Filter
$27.28
PartSelect Number: PS3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f... 
$25.31
In Stock
Affresh Washing Machine Cleaner - 3 pack
$25.31
PartSelect Number: PS1960673
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe... 
$21.95
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$21.95
PartSelect Number: PS12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ... 
$37.89
In Stock
Refrigerator Deodorizer
$37.89
PartSelect Number: PS12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food. 
$32.93
In Stock
Cooktop Cleaning Cream
$32.93
PartSelect Number: PS12717774
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d... 
$35.68
In Stock
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1149760
Manufacturer Part Number: 316441804
Manufacturer Part Number: 316441804
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST