This part is the replacement dispenser grille for your refrigerator. It is made of black plastic and is approximately 10 inches wide and 4 inches deep. The dispenser grill sits at the bottom of your ice dispenser assembly and catches any spills when your ice or water dispenser is running. If your dispenser grille/drip tray is missing or damaged, this is the part that replaces it. To replace the dispenser grille, simply remove it and insert the new one. This part is sold individually and is and authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Dispenser Grille
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
CHRISTIE K - April 22, 2019
Verified Purchase
Quick & easy
Part fit better than the old one! The order arrived quickly with no hassles.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The actuator arm broke on the unit and it had to be replaced
The actuator arm was the only part that was a little difficult. The drip tray and the kick plate went on very easily. First, we went online to your schematic on the unit. This showed how it was assembled and how it came apart. We then terminated the power to the refrigerator, and removed the drip tray which exposed two screws holding in the face plate for the ice/water on the door of the refrigerator. We then removed three screws from the control panel and pulled it forward. This exposed the actuator and two more screws that held it into place. We removed them and unplugged the small plug giving power to the actuator. We then installed the new part and replaced all the screws that had been removed. We reassembled the face plate and the screws there and then snapped in the drip tray. When we turned on the power everything worked fine.
did thomas stainless steel paint on white frig. needed to replace white drip tray and label
the tray just pulls out, with a little encouragement. then the new one was put in place. the module label just peeled off and i stuck on the new one. new frig looks fabulous. i used krylon for plastic to paint the rest of the housing for the ice/water dispenser. i chose not to paint the water tray as i feared the frequent wasking would wear on the painted part. new frig just looks fabulous !!!
Easy easy easy! I usually call for service that costs $75 just for a repairman to come to the house...I found this website, typed in the model number of the fridge and voila...found the part. Received the part in one day! Repair took abut ten minutes from start to finish. The broken part was up inside the door, not the hinge on the box part of fridge. At first glance I thought I had the wrong part. Must look at door and pry out broken bearing with screw driver. Just slide in new bearing. I am usually not one to repair things myself so I was quite proud after fixing this one....I would recommend this company to all of my friends!!!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
July 12, 2019
I am looking for wci 241649005 which is silver. Your site suggests 241649003 which is black which will not work. Is wci 241649005 no longer available? Frigidaire silver drip tray for phs39ejss1
For model number PHS39EJSS1
Hello Thomas, Thank you for the question. The Silver 241649005 has been discontinued and replaced with Black. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
November 15, 2018
The grille drip tray doesn't want to slide out ,im afraid to pry it because it might break, any suggestions?
For model number FRS23LH5DS9
Hello Ron, Thank you for the question. You can try to pull the grille straight out and then up and it should release. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pamela
December 2, 2025
Does this part , Dispenser Grille, come in gray? I only see black but our model is gray.
For model number LFSS2612TF0
Hello Pamela, thank you for reaching out. Yes, the dispenser drip tray in grey color is part number PS12364140. We hope this information helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
