Part Location Diagram of 316436000 Frigidaire Infinite Burner Switch - Small Element - 240V
See part 54 in the diagram
Replacing your Frigidaire Range Infinite Burner Switch - Small Element - 240V
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Infinite Burner Switch - Small Element - 240V

★★★★★
★★★★★
5 Reviews
$89.13
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS1145039
Manufacturer Part Number 316436000
Manufactured by Frigidaire
Product Description

Infinite Burner Switch - Small Element - 240V Specifications

This switch controls the stove top surface burner.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Range Infinite Burner Switch - Small Element - 240V

Replacing your Frigidaire Range Infinite Burner Switch - Small Element - 240V
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Tappan, Crosley.
Part# 316436000 replaces these:
AP3890378, 1155394, 316021500, 5304506424
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.8
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 11 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Switch Was Making A Arcing Sound When Burner Was On
Removed the back cover of the range. Removed the knob from the front of the switch. Removed 2 screws holding switch to range. Removed wires one at a time and connected to proper poles on replacement switch and reinstalled new switch on range
Other Parts Used:
  • Gerald from Paris, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
58 of 80 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
new switch was not wired like old one
i first replaced element after old smoked & quit. replaced switch but i noticed when i started to replace the wires one at a time something didn't seem right. after checking the #s on the old one, they didn't match up with the new one.luckily i had the stove diagram from a packet on the back of the stove. i traced each wire according to the diagram and everything worked out fine. i'm just glad i didn't replace each wire to wire.the #'s were on the switch where each wire went which was different than the org. even though they looked the same.
Other Parts Used:
  • PERRY from LECANTO, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
20 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the indicator light for burners broke and shorted agaist the back panel on range
This caused the burner switch cotacts to arc burning out the switches. It took 30 or 43 minutes to replace the switches and put the range back together. The bake element took 10 min. ti replace. Grandma has her range back and I am a happy grandpa!! Thanks for the help and we saved over $170.00 for the repairs. Jim Johnson
Other Parts Used:
Oven Bake Element Infinite Burner Switch
  • James from Caldwell, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
7 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both front burners began heating too fast and too high. One damaged the finish on the splash pan.
At the Frigidaire parts website, I found the parts and saw that there are videos that show how to replace the burner controls. In brief:
1) Slide the range/oven out so you can get to the back of the control hood.
2) There are three screws that hold the cover in place (the video showed four).
2a) The video also suggests using a #1 square bit. I found that there was indeed a square hole in the caps of the screws, but they also had a hex head that a 1/4" hex nut driver fits. So I used that.
2b) Be careful taking out the last (top center) screw. When it comes free, the cover can drop and bruise or cut your foot or the floor. Having a helper is worth it!
3) The switch for the larger elements has a red dot on front and back. Match it with the one in place that has a red dot. The switch for the small element doesn't have a dot.
3a) Holding a new switch in your hand, remove one wire at a time from the switch in the control hood and put it in the same place on the new switch. I found that for my stove, there was a fixture holding two wires and another holding three wires. This made it impossible to put the wires on wrong.
3b) When all wires have been transferred, pull off the control knob in front and unscrew the two screws that hold the old switch in place. Take out the old switch and replace it with the new switch.
3c) Use the two screws to attach the new switch in its place and replace the control knob.
4) Repeat for as many switches as you purchased. I did all four.
5) Replace the cover.
6) Slide the range back into place.

I found black deposits on all the switches, that must have come from a contactor inside, so I was glad I replaced them all.

Another tip: while the unit is out, clean off the sides and back that you couldn't get to while it was in place. For us, this took as long or longer than the steps above for replacing the switches.
Other Parts Used:
Infinite Burner Switch
  • Larry from WILMINGTON, DE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The front left dual element stopped regulating temperature
Replaced the dual element switch and that fixed it up
Other Parts Used:
Dual surface element switch
  • Miguel from PLANT CITY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner switch work sometime.
I follow the video on your site
Other Parts Used:
  • junius from WICOMICO, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Long filter didn't fit, excessive plastic flashing, poor quality
hand tried flashing, still did not fit well. Too large. Appears to be made from worn out mold.
No instructions included with burner controller, it would have been helpful to have a wiring diagram as the new controller did not match old. Once wired, controller works great
Other Parts Used:
Lint Filter
  • William from KANSAS CITY, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old part was replaced by mfg’r. Wiring different. No drawings or any info was included to show wiring.
I was forced to call in a pro repairman. Will cost me at least $150 for part and repairman. I could have done job if instructions on how to rewire had been included.
Other Parts Used:
  • Nelson from FRUITHURST, AL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
my burners would just heat up solid red even when i had controls turned down to 2 or 3. i would have to turn controls off and back on, then they still would just go back to glowing red
This was my first time ever working with electrical issues. My husband is not physically able to do repairs now. Very easy fix. Just viewed video repair instructions and it went exactly as instructed. Within 45 minutes, I had my stove repaired and cleaned and back in working order!! Great results. My range is working perfectly again and Mama is happy!!
Other Parts Used:
Infinite Burner Switch
  • Leota from AUXVASSE, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right rear burner not working properly
After a brief discussion with CS about the electric stove part was shipped it arrived and I proceeded to install I found it needed to be installed sideways not up & down like the old one. The terminals did not line up so I put the black lead first and the purple lead last in doing that I burned out the switch??? was not easy to install as the video showed his switch matched each wire? My installation was sideways??
Other Parts Used:
  • Dante from SOUTHOLD, NY
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

23 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Adolfo
October 23, 2017
One of the large burner is very hot, even the switch is at minimum.
For model number FEF352DWA
PartSelect logo
Hi Adolfo, Thank you for the question. When the element is not keeping the proper temperature, you will need to replace the burner control switch.Hope this helps!

27 people found this helpful.

Was this helpful?
Thank you for voting!
Pedro Barrera
December 21, 2018
Does this switch come with a control knob?
For model number fef316BSF
PartSelect logo
Hello Pedro, thank you for your question. The knob does not come with the switch it is sold individually. That part number is PartSelect Number: PS439834. I hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Carl
August 25, 2017
Once the burner is hot and then the knob is turned down, the burner will keep heating up. Will this part fix that issue or is there another? Thanks.
For model number FEF352FSE
PartSelect logo
Hi Carl, Thank you for your question. I would actually suggest testing your burner, switch, and wire between the switch. Either one of these parts could be causing that issue. You can test your burner and switch with a multi-meter. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Mattie
July 15, 2019
Is a switch need for all burners
For model number TEF351EWN
PartSelect logo
Hi Mattie, thank you for your question. I have listed both types of switches below for you. You need two of each. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Russ Stanford
January 9, 2018
We have lost heating to both the stove elements and oven. When you turn the stove top elements to a off position then turn back on there is a clicking noise then all power stops.
For model number FEFL67DCJ
PartSelect logo
Hello Russ, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: the burner switches, the wiring harness, the main control board, and the temperature sensor. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Rod
November 9, 2019
Top elements sometimes go full-on and will not turn off CFEF366EMG. Has also been known to turn on low and still go on high heat, these problems are intermittent.
For model number CFEF366EMG
PartSelect logo
Hello Rod and thanks for writing. The surface element switch sends voltage to the surface element coil. Sometimes, when the surface element switch fails, the electrical contacts inside the switch fuse together, causing the switch to send continuous voltage to the surface element. If the surface element switch is defective, replace it. We hope this helps. Please contact us at any time

3 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
December 8, 2019
Looking for the correct burner switch for ffef3018lbd
For model number Ffef3018lbd
PartSelect logo
Hello Jim, Thank you fro your question. The burner switch for the back left and right small burners is under part PS1145039 for your model, the front left burner switch is under part PS3504401, and the front right burner switch is under part PS1145040 for your model. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tayra
November 27, 2018
While cooking on the burner I heard a loud pop and then it quit working completely. The light comes on when I turn the knob but the burner will not work. Could it be this part or the element?
For model number GLEF384HBA
PartSelect logo
Hello Tayra, Thank you for the question. If the light comes on, this normally means it is a issue with the element. Only way to know %100 before placing an order is to test the continuity with a Multi Meter. Thank you for your inquiry, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Bobby
April 15, 2018
My 6 inch burner will heat up by its self, with the switch off. Causing my hot surface light to stay on. Element looks good. Do i need a switch? Thanks
For model number FEFL79DBL
PartSelect logo
Hi Bobby, Thank you for your question. It could be your switch. The two parts that you generally check when having an issue like this is your burner itself or the burner switch. You can test both parts with a multi meter to be sure if you wanted. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jeff
October 30, 2019
Infinite burner switch for large burner needs replacing on Kenmore diagram it is #54 on your diagram it is 54a but i need one for the large element both your items for sale say small element so which fo i order
For model number 790.94153310
PartSelect logo
Hello Jeff, thank you for inquiring. You will need the Infinite Burner Switch, part number PS1145040 for your range. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1145039
Manufacturer Part Number: 316436000
Brand
Model Number
Description
Frigidaire
00462048A
Range - Range
Frigidaire
00462048B
Range - Range
Frigidaire
00462048C
Range - Range
Frigidaire
00462048D
Range - Range
Frigidaire
20462052A
Range - Range
Frigidaire
20462052B
Range - Range
Frigidaire
20462052C
Range - Range
Tappan
31-2232-00-01
Range - Free Standing, Electric
Tappan
31-2232-00-02
Range - Free Standing, Electric
Tappan
31-2232-00-03
Range - Free Standing, Electric
Tappan
31-2232-23-01
Range - Electric
Tappan
31-2232-23-02
Range - Free Standing, Electric
Tappan
31-2232-23-03
Range - Free Standing, Electric
Tappan
31-2442-00-01
Range - Electric
Tappan
31-2442-00-02
Range - Electric
Tappan
31-2442-23-01
Range - Electric
Tappan
31-2442-23-02
Range - Electric
Tappan
31-2452-00-01
Range - Electric
Tappan
31-2752-00-01
Range - Free Standing, Electric
Tappan
31-2752-00-02
Range - Free Standing, Electric
Tappan
31-2752-00-03
Range - Free Standing, Electric
Tappan
31-2752-23-01
Range - Free Standing, Electric
Tappan
31-2752-23-02
Range - Free Standing, Electric
Tappan
31-2752-23-03
Range - Free Standing, Electric
Tappan
31-2852-00-01
Range - Electric
Tappan
31-2852-00-02
Range - Electric
Tappan
31-2852-00-03
Range - Electric
Tappan
31-2852-23-01
Range - Electric
Tappan
31-2852-23-02
Range - Electric
Tappan
31-2852-23-03
Range - Electric
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service