Introducing the robust GE Foot Grate, carefully designed to keep your cooktop smooth and damage-free. Constructed from premium materials, this sturdy burner grate pad sticks effortlessly to the bottom...
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
This surface burner spark electrode is designed to ignite a gas burner by producing a reliable spark when the control is turned on. It helps restore proper burner operation when there is no spark, a w...
If your appliance is starting to dim, the GE Lamp Halogen might just be the solution you need. This 20-watt light bulb not only brightens up your appliance, but also ensures it works at its absolute b...
Get your griddle/grill burner up and running in no time with the GE Igniter Glowbar. This highly reliable appliance part has been designed specifically for your griddle/grill burner to ensure an easy ...
You're looking at the GE Surface Burner Grate Support Frame, a top-notch replacement part specially built for your GE range. This support frame is what keeps your burner grate secure and steady, provi...
This cast iron burner grate gives your cooktop a sturdy, stylish upgrade. It holds pots and pans securely over the flame and spreads heat evenly for better cooking results. The smooth gray finish look...
This burner cap replaces a worn or discolored cap on high-output burners, helping ensure even heat distribution and reliable cooking performance. Designed for 18,000-BTU burners, it’s a direct drop-in...
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.
