This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This broil element is a genuine replacement part designed to deliver high heat for broiling in compatible Whirlpool, KitchenAid, Maytag, Amana, and Jenn-Air ovens. Located at the top of the oven cavit...
This single oven rack is used to provide a durable surface for your cookware inside the oven for baking/broiling. The oven rack measures approximately 24.76” x 15.78”, is made of metal and is chrome i...
This 120-130 volt 15-watt light bulb is used to illuminate the interior part of the oven cavity when the door is open or when the light switch is turned on. The bulb has a small screw base and is appr...
If your stove burner isn’t heating up or won’t turn on, this control switch might be the fix. It helps manage how hot your burner gets by turning the power on and off quickly to keep the temperature j...
This surface element is for ranges.
The surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before insta...
This bake element is found on the bottom of the oven.
$140.07
In Stock
Questions And Answers for YKERS807SS02
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
January 13, 2020
Controll panel displays error code f1e0 replace oven vi
For model number YKERS807SS02
Hi Jim. Disconnect power for at least 30 seconds and then reconnect. Allow at least a minute after power has been restored and if error code reappears, replace control board (clock). Thank you for your question and good luck with your repair!
Hello Terri, thank you for your question. We have researched the model you have provided, and we would suggest the Bake Element, part number PS11750370. We hope this helps!
Hi Mahfouz, thank you for contacting us. The error code indicates that there may be a problem with the user interface or keypad, the control, or the associated wiring. Please verify that the wire harnesses are functioning correctly. If they are fine, the issue could be with the touchpad, part number PS11747328. You may need to replace it to fix the issue. We hope this solves your problem!
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.
First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together. Job done in less than 30 minutes.
This repair would have cost $164 through A&E factory service.
