This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This lid lock helps keep your washer running safely and smoothly. It locks the lid during cycles so the machine won’t spin or wash with the lid open. If your washer won’t start or the lid won’t close ...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This p...
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged,...
The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which wi...
This drain pump assembly removes water from the washer during the drain cycle. If your washer isn’t draining properly, replacing the pump may be necessary. Ensure compatibility with your model before ...
Metallic screw that is less than an inch long. Does not include the plastic washer.
$10.62
In Stock
Questions And Answers for WTW8500BC0
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Christopher
January 4, 2020
I do not have the year this was made for the make and model number i would like to know what they are please thank you
For model number WTW8500BC0
Hello Christopher and thank you for writing.
Additional to the model number we also need the serial number to establish the year of your unit. Looking forward to your reply, please always include the model number. Looking forward to your reply, please always notate the model number. Thank you.
Was this helpful?
Thank you for voting!
Abby
August 15, 2023
My washer is leaving a grey-like stain on clothes (stains are not permanent, they wash out after it is run through the washer again. It looks like lint and if you rub it, it smells like detergent. I have attempted multiple different clean cycles with different cleaning agents. I am using HE detergent and only a very small amount at a time with small-medium loads of laundry. Is there a lint filter on this washer that needs replaced? Anything else that could be causing this issue?
For model number WTW8500BC0
Hi Abby, thank you for contacting us. According to our research, the issue is with the hot water not reaching the washer. If the detergent is not dissolved properly, it will leave stain on the clothes. Hot water is necessary for the proper dissolution of detergent. We recommend you check the water supply. Make sure hot water is reaching. If not, replace the water inlet valve, part number PS11731257, to fix the issue. We hope this is what you were looking for!
Water is leaking onto the floor from the washer. I think water is still in the machine under the wash basin. Can it be repaired or time for a new machine?
For model number WTW8500BC0
Hi Janine, thank you for the question. Based on our understanding, we would suggest checking the drain hose first. If it is fine, the issue could be with the drain pump, part number PS11754363. You may need to replace it to fix the issue. We hope this solves your problem!
My washer is leaking. When spinning water is flick all over the floor. Looks like it's coming from the center of the washer. Any suggestions?
Thanks
For model number WTW8500BC0
Hi Jason, thank you for contacting us. Based on our understanding, we would recommend replacing the washer tub seal and bearing kit, part number PS3503261. We hope this solves your problem!
My Whirlpool cabrio platinum is skipping time , one time it says 55 minutes and then 6 minutes remaining and after cycle is done clothes are damp and not cleaned properly
For model number WTW8500BC0
Hello and thank you for writing.
It certainly sounds like it could be a faulty control board PS10067049, you should check the part(s) for signs of damage such as burn marks, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
3rd time replacing this part. The plastic grooves against the metal get wore down. Only 20$ to repair ! Take off the 3/8 bolt - center pops out. Remove screws pop out old piece and tighten new piece each side evenly.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
