This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This washing machine suspension rod kit includes 4 suspension rods, 4 suspension balls, and 4 bushings to stabilize the washer tub and minimize vibrations during operation. If the washer shakes or vib...
This lid lock helps keep your washer running safely and smoothly. It locks the lid during cycles so the machine won’t spin or wash with the lid open. If your washer won’t start or the lid won’t close ...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This p...
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged,...
The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which wi...
This drain pump assembly removes water from the washer during the drain cycle. If your washer isn’t draining properly, replacing the pump may be necessary. Ensure compatibility with your model before ...
$151.24
In Stock
Questions And Answers for WTW8240YW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
January 12, 2020
Spin cycle stops short or not at all of complete cycle shows ol on display pamel
For model number WTW8240YW0
Hello John and thank you for writing.
It certainly sounds like it could be faulty basket hubs PS11723155, you should check for signs of damage, and replace if necessary.
OL stands for “Overload”, so in other words, the washer thinks the tub is too hard to move because it's overloaded and the motor is struggling or the unit is way out of balance causing the washer to struggle. Defective basket hubs can cause this error code.
We hope this helps. Please contact us anytime if you require further assistance.
Washer leaks whenever we attempt to use the 'clean washer with a fresh' cycle. It does not leak otherwise. Is there a reason this would be the case? Tia
For model number WTW8240YW0
Hello and thank you for writing.
The clean washer cycle uses a higher water level which would explain why this only happens in this cycle. This could also possibly indicate a malfunctioning rotary sensor PS11749664, you should check for signs of damage, and replace the parts as necessary. We hope this helps. Please contact us anytime if you require further assistance.
The washing machine will wash clothes, drain water, but not spin on any cycle. What part is causing this issue?
Thanking you in advance,
Sharon
For model number WTW8240YW0
Hi Sharon, Thank you for reaching out. This could be caused by a faulty Lid Lock Assembly. The Lid Lock prevents the drum from spinning for safety reasons when the Lid is open. If the Lock is faulty it can not tell the controls it is safe to spin. We hope this solves your problem!
My fabric softener depended seems to be stop up, how do I clean it out
For model number WTW8240YW0
Hi Robert. Rinse the dispenser under hot water, working some of the fabric softener free with your fingers. Set the dispenser in a bucket add water and and laundry soap, allow the dispenser to soak for 10 mins. Rinse the dispenser under warm water, wiping gently with a soft cloth. Wipe it gently with a soft cloth if the softener does not rinse away on its own. Dry the dispenser with a fresh cloth, then put it back into position in the washing machine. Thank you for your question and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Julie
February 22, 2020
Does this model washer have a removable filter you can clean out? I am getting a residue left on my clothes.
For model number WTW8240YW0
Hello Julie,
Thank you for your question. We have done and investigation into your model WTW8240YW0. The removable filter for this model would be listed under part number PS349000. It has currently been discontinued by the manufacturer. The filter is located in the side of the washer tub, you will need a screwdriver to remove it. We hope this helps you.
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
Went on u tube saw different video to How disassemble the top to have access to the rod. Changing one by one those rod I was in need of my wife to hold the cover while I was changing the rod.... order for suspension rod kit. Reassemble the top by sliding the cover and to snap. Screw back the panel. And it solve the problem. My wife was really happy so me. It can be done by anybody but first go on the internet to get a idea.
