This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 4 hrs and your part ships today!
This washing machine inlet valve is a genuine OEM replacement part designed to regulate water flow during the fill cycle. Controlled by an internal solenoid, the valve opens and closes as needed to al...
$110.42
In Stock
Order within the next 4 hrs and your part ships today!
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
$25.31
In Stock
Order within the next 4 hrs and your part ships today!
If your washer isn’t cleaning clothes like it used to or making strange noises, the washplate might be the problem. This part sits at the bottom of the tub and helps move clothes through the water for...
$141.16
In Stock
Order within the next 4 hrs and your part ships today!
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
$10.59
In Stock
Order within the next 4 hrs and your part ships today!
This lid lock assembly is designed for use in various top-load washing machines and serves as a critical safety feature. Located beneath the washer lid, it includes the locking mechanism and wiring ha...
$115.70
In Stock
Order within the next 4 hrs and your part ships today!
If your washer isn’t spinning, agitating, or cleaning clothes like it used to, the gearcase might be the issue. This part powers the agitator and spin basket, helping your machine run smoothly. It fit...
$351.59
In Stock
Order within the next 4 hrs and your part ships today!
This drain pump is engineered for top-load washing machines and plays a vital role in the appliance’s drainage system. During the drain cycle, it efficiently removes water from the washer tub and chan...
$166.89
In Stock
Order within the next 4 hrs and your part ships today!
This clamp helps to prevent leaking by holding the end of water hose in place.
$14.37
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for WTW7500GW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
March 14, 2024
The washer is very loud when spinning, kind of sounds like a jet flying by, how do I fix this?
For model number WTW7500GW0
Hello Dan, thank you for getting in touch. Based on the description that you have provided, the issue seems to be with the transmission. We would recommend checking the transmission, part number PS12741641, to solve the problem. Glad to be of assistance!
Washer fills fine towards the end of the cycle the Code LF comes on. Cleaned hoses and screens on back of the washer but still send a code LF last part of the cycle.
For model number WTW7500GW0
Hello Chuck, thank you for your question. LF (long fill) appears in display, the washer is taking too long to fill. It's possible the drain hose extends more than 4.5" into standpipe. You can check out our blog at https://www.partselect.com/blog/maytag-washer-lf-error-code/#:~:text=The%20LF%20error%20code%20on,they%20mean%20the%20same%20thing.. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Wynona
October 1, 2021
Every works across the top part. Add garments works. The lid locks, the machine does not do anything else. We have checked electrical current, water hoses, etc. All work
For model number WTW7500GW0
Hello Wynona, Thank you for your inquiry. We have researched your model and it could be a problem with the water level or the water inlet valve. The water pressure sensor for this model is controlled by the main control board and the lower wiring harness, so if you test the valve and it tests correctly for continuity, check the wiring harness for any visible damage. If you do not see any, you may have to replace the board. Good luck with your repair.
Hello Ronnie, Thank you for contacting us. Researching your model, we would recommend checking the lid lock, the water inlet valve, the stator and the rotor. You can test the parts with a multimeter. Good luck with your repair.
Do you have a video on how to change the power cord on my model washer?
For model number WTW7500GW0
Hello Darla, Thank you for contacting us. While we do not have a video for the exact part number for your washer, we do have a video for a similar power cord. Good luck with your repair.
1.) disconnect power to your washer. Turn off water supply and disconnect from the washer.
open the washer top and remove plastic cap from the wash plate
2.) using 7/16 socket, remove bolt from the wash plate. If you can't remove it with a socket , I recommend using impact wrench.
3.) remove wash plate ( you might need to spray penetrating oil or wd40 inside the bolt hole to loosen it. Check to make sure the wash plate gear grooves are not worn down, if they are, replace it.
4.) using your Maytag specific spaner nut wrench, remove the spaner nut from the shaft of the gear case. This should be right underneath where the wash plate was. If you can't turn it by hand , use a rubber mallet or hammer to encourage it.
5.) some people remove the wash basket at this point. I don't think it is necessary.
6.) close your washing machine. Tape the top closed to keep it from flying open. Tilt your washer back and prop it up where you have access to the underside of the washing machine.
7) remove motor rotor bolt and pull rotor off of the motor.
8.) disconnect the two wire connectors that supply power to motor. using a socket, remove bolts that are keeping motor attached to the gear case.
9.) Now that the gear case is all the is remaining on the underside, you can remove the 4 bolts that are holding the gear case to the washer. Now try to pull gear case out.
10.) if gearcase will not pull out, lower washer back to upright position. Spray penetrating oil or wd40 around the shaft of the gearcase and allow it to sit for 5-10 minutes. Using a hammer, lightly tap on the shaft of the gearcase and it should now fall out. ( you might have to apply penetrating oil again, or apply more force with the hammer.
11.) reinstall motor to new gearcase. Insert new gear case to the washer. Reinstall bolts and reconnect power supply wires.
12. ReInstall spaner nut inside the washer, reinstall wash plate.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Removed two screws on back of lid to raise top removed tub one bolt and one spanernut pulled tub lowered top reinstalled screws laid washer down to get to bottom of washer unplugged wiring removed four bolts pulled gear box and motor removed motor from gear box installed motor on new gear box reassemble washer
