WTW5105HW4 Whirlpool Washer - Overview

Sections of the WTW5105HW4

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Washer Drive Pulley – Part Number: W10721967
Washer Drive Pulley
★★★★★
★★★★★
(19)
PartSelect #: PS10057144
Manufacturer #: W10721967
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
$49.29
  In Stock
Order within the next 5 hrs and your part ships today!
Washer Drive Belt – Part Number: WPW10006384
Washer Drive Belt
★★★★★
★★★★★
(13)
PartSelect #: PS11747978
Manufacturer #: WPW10006384
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly...
$35.94
  In Stock
Order within the next 5 hrs and your part ships today!
Affresh Washing Machine Cleaner - 3 pack – Part Number: W10135699
Affresh Washing Machine Cleaner - 3 pack
★★★★★
★★★★★
(3)
PartSelect #: PS1960673
Manufacturer #: W10135699
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
$25.31
  In Stock
Order within the next 5 hrs and your part ships today!
ACTUATOR – Part Number: W11481722
ACTUATOR
★★★★★
★★★★★
(4)
PartSelect #: PS16221077
Manufacturer #: W11481722
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
$106.65
  In Stock
Order within the next 5 hrs and your part ships today!
Washer Drain Hose – Part Number: W11244231
Washer Drain Hose
★★★★★
★★★★★
(3)
PartSelect #: PS12578897
Manufacturer #: W11244231
The drain hose carries used water from the washer to your house drain.
$31.91
  In Stock
Order within the next 5 hrs and your part ships today!
Hose Clamp – Part Number: WP285655
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.95
  In Stock
Order within the next 5 hrs and your part ships today!
Washer Washplate Screw – Part Number: W10752187
Washer Washplate Screw
PartSelect #: PS10064547
Manufacturer #: W10752187
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
$10.59
  In Stock
Order within the next 5 hrs and your part ships today!
LATCH – Part Number: W11700916
LATCH
PartSelect #: PS17217010
Manufacturer #: W11700916
Keep your top-load washer running safely and smoothly with this replacement lid lock assembly. It’s designed to secure the lid during active cycles, preventing interruptions and ensuring the machine o...
$77.73
  In Stock
Order within the next 5 hrs and your part ships today!
CAPACITOR – Part Number: W11395618
CAPACITOR
★★★★★
★★★★★
(2)
PartSelect #: PS12731163
Manufacturer #: W11395618
Ensure your washer starts and runs efficiently with this start capacitor, which delivers the necessary electrical boost to initiate motor operation. Common symptoms of a failing capacitor include a wa...
$127.55
  In Stock
Order within the next 5 hrs and your part ships today!
Impact Absorber – Part Number: WP8564458
Impact Absorber
PartSelect #: PS11746560
Manufacturer #: WP8564458
$13.95
  In Stock
Order within the next 5 hrs and your part ships today!
Drain Pump Assembly – Part Number: W11399437
Drain Pump Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS12731241
Manufacturer #: W11399437
This genuine drain pump assembly is engineered to efficiently remove water from the dishwasher tub during the drain cycle, ensuring optimal performance and preventing water retention. Designed for com...
$217.57
  In Stock
Order within the next 5 hrs and your part ships today!
Extension Hose – Part Number: 285863
Extension Hose
★★★★★
★★★★★
(3)
PartSelect #: PS334681
Manufacturer #: 285863
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
$38.59
  In Stock
Order within the next 5 hrs and your part ships today!

Questions And Answers for WTW5105HW4

Be the first to ask our experts a question about this model!

Common Symptoms of the WTW5105HW4

[Viewing 13 of 13]
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Cycle Not Advancing
Fixed by
these parts
Fixing Fixing Fixing
Show All
Draining Issues
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Parts Used:
Washer Drive Belt Washer Drive Pulley
  • Jerry from WALLA WALLA, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
94 of 126 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Parts Used:
Washer Drive Pulley
  • David from BLOOMINGTON, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
66 of 99 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Smelled a burning odor occasionally
First, I checked the belt before ordering and then decided to order the belt, capacitor, and clutch assembly (if I needed to replace). I replaced the belt noticing the older belt came right off and new one was tighter going on. I replaced the capacitor since I had it handy and it can be known to cause this smell also. After setting washer back up and started a cycle I noticed the spin cycle would not start properly so I thought maybe the capacitor (new one) was faulty or just not the exact match even though it was said to be. I replaced my older capacitor back on and again ran cycle and it ran great. Thus I decided to send the parts which were not used. I would recommend this site as I have used them in the past before on other items. They ship fast and have a great return policy if parts not used.
Parts Used:
Washer Drive Belt
  • Paul from E NORTHPORT, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set, Wrench (Adjustable)
17 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!