This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
This door strike is a crucial safety component in top-load washing machines, designed to engage with the door latch and keep the lid securely closed during operation. Located along the door frame, it ...
This washing machine inlet valve is a genuine OEM replacement part designed to regulate water flow during the fill cycle. Controlled by an internal solenoid, the valve opens and closes as needed to al...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
Keep your top-load washer running safely and smoothly with this replacement lid lock assembly. It’s designed to secure the lid during active cycles, preventing interruptions and ensuring the machine o...
This agitator assembly is a key component in many washing machines, designed to rotate back and forth during the wash cycle to help loosen dirt and stains from clothing. It features a central shaft wi...
This drive belt connects the washer motor to the spin system. Replace if the washer has spinning issues. Unplug the unit before installing.
$65.15
In Stock
Questions And Answers for WTW5105HW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
February 27, 2023
Machine will not cycle basket will not spin. Basket motor buzzes like it has power but doesn’t spin code E7 comes up
For model number WTW5105HW2
Hi James, thank you for your inquiry. F0E7 error indicates that load was detected while attempting to run the clean washer cycle. First, you need to check the load inside your washer, remove it, and then restart the clean washer cycle. If the problem persists, the only thing you need to do is rebalance the clothes and try the washer again. If the error will not reset, just unplug the washer for 60 seconds to reset the error. Then you can use your washer like normal again. Bulky items will commonly cause the washer to give you this error, and some things like rugs and sheets may never spin if they cannot balance themselves. Just understand you can keep trying over and over to rebalance the clothing if this error keeps coming up. If something cannot be spun out, you will need to ring out the items by hand. If this does not help you will need to replace the control board, part number PS16620433. We hope this is what you were looking for
I am replacing the gear case, is there an additional seal to the tub or is everything I need included in kit w11449840
For model number WTW5105HW2
Hello Rudy, thank you for contacting us. The gear case, part number PS16730207, fits your model and this is all you need to replace the gear case. The washer, part number PS16620404, is a separate part and is available separately. We hope this helps.
I received the gear case kit ,it came with a washer on it , I ordered another as you suggested is it necessary to install both washers, and still not sure if a seal is needed on the tub?
For model number WTW5105HW2
Hi Rudy, thank you for reaching out. Based on our research, you may install the gear case, part number PS16730207, with only one washer. Also, you may use a washer, part number PS16620404, as a seal between the tub and the gear case. We hope this sorts out your problem!
Hello Walter, thank you for your question. F7 E1 Code, This code indicates a motor speed sensing error, the motor can not achieve the correct speed for the cycle selection. We recommend checking and replacing the Shift Actuator PS16221077. We hope this helps.
Hi Becky, thank you for contacting us. Based on our understanding, we would suggest checking the drain hose for clogging first. If it is fine, the issue could be with the drain pump, part number PS12731241. You may need to replace it to fix the issue. We hope this solves your problem!
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
