This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
If your washer isn’t cleaning clothes like it used to or making strange noises, the washplate might be the problem. This part sits at the bottom of the tub and helps move clothes through the water for...
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
The lid lock assembly is an essential safety component in top-load washing machines, ensuring that the lid remains securely closed during the wash and spin cycles. This prevents accidental openings th...
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
$11.80
In Stock
Questions And Answers for WTW5010LW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elijah
February 4, 2025
I forced the door open during a load and broke a black plastic piece. The washing machine wont start. The sensor light just flashes
For model number WTW5010LW0
Hello Elijah, thank you for your inquiry. The black plastic piece you broke might be a part of the lid lock assembly, part number PS16543458. It prevents the washer lid from opening during the wash and spin cycles, ensuring safety and operational integrity. A damaged lid lock assembly can cause the washer to not start. We would recommend checking it to solve the problem. We hope this helps!
Hi Alice, thank you for contacting us. If you are looking for the wash plate, its part number is PS10064549, and the wash plate screw is part number PS10064547. We hope that helps!
DO YOU CARRY THE TRANSMISSION?
I BELIEVE THE PART NUMBER IS Part Number
PD00076149
For model number WTW5010LW0
Hello Francis, thank you for getting in touch. The transmission or gear case assembly, part number PS16730207, will fit your model number. We hope this helps.
I recently changed the shift actuator and repaired the pump wiring harness on my washer and it’s been fine for a while but it recently started getting really loud during the spin cycle (sounds like a jet engine) and I’m pretty sure a bearing is going bad. When I spin the drum manually I hear a bit of a sound too. Do they sell the bearing for this machine?
For model number WTW5010LW0
Hi Eric, thank you for reaching out. Yes, the issue is most probably because of the fault in the bearings. The bearings for your model do not come separately. They come attached to the gear case, part number PS16730207. You may need to replace it to fix the issue. We hope this sorts out your problem!
Water does not stop and there is a green light blinking in the upper right of the control panel. The water does stop if I unplug so I don’t think its the valves.
For model number WTW5010LW0
Hi Justin, thank you for reaching out. Based on our understanding, we would suggest checking the control board, part number PS16555170. It manages all core washer functions, including filling, washing, draining, and spinning, to ensure efficient and reliable operation. A relay on the board that sends power to the water valves may be fused in the on position. You may need to replace it to fix the issue. We hope this sorts out your problem!
Watched a video to get a general idea. Moved washer to garage. Raised lid, supported with s-hook and light chain. Front springs were easy, except no hole for the rod to hang in so used chain and small screwdriver through mounting hole. Back springs were not as easy. Finally removed the back panel to get to the rods. Bingo, much easier and only took 5 min to remove the back panel. reassemble and she works like a charm. Suggest to find a video reflecting your particular brand and model as all are similar but uniquely different. Easy project though.
Used video provided,but while reinstalling shocks pull the shock absorbers thru holes in washer deck using a stiff wire or a metal coat hanger will also work. This made installation so much easier!
