This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a s...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
This 6-pin shift actuator is a genuine replacement part designed for use in select washing machines. It plays a critical role in controlling the movement of the transmission, allowing the appliance to...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
This inlet valve is a genuine replacement component designed for use in various washing machines. It regulates water flow by opening and closing the hot and cold water channels during the wash cycle, ...
$98.04
In Stock
Questions And Answers for WTW4955HW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maher
November 8, 2021
What is the capacity in cubic feet of this washer model?
For model number WTW4955HW2
Hello Maher, Thank you for your inquiry. We are showing this model to be 3.8 cubic fee in capacity. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ronald
October 23, 2024
My washer doesn't drain completely I have to go back to drain and spin after cycle is done.There is nothing restricting the drain.what do you think?
For model number WTW4955HW2
Hello Ronald, Thank you for reaching out. This sounds like the water is taking to long to drain and by time the drain cycle timer is done there is still water left in the drum. A slow drain could be caused by a faulty Drain pump if it is already confirmed there is no blockage in the pump and hose. We hope this is helpful!
Washer will not complete fill cycle. It will start and stop fill multiple times and then shuts down.
For model number WTW4955HW2
Hello Brad, thank you for your question. We recommend checking the inlet valve PS11773194 and the fill hoses PS1487205. If they are clogged, clean them with a brush (an old toothbrush works great) and mild soap and water. Good luck with your repair.
Hello James, thank you for getting in touch. A washing machine that jumps during the spin cycle is usually caused by an unbalanced load, improper leveling, or worn suspension rods, part number PS12349409. If the washer is unbalanced or not level properly, you will need to replace the suspension rods to fix the issue. We hope this helps.
Washer passes sensing fill goes into wash and beeps every second but wont leave that cycle
For model number WTW4955HW2
Hello Todd, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the control board, part number PS16744868, to solve the problem. Glad to be of assistance!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
Replaced the gears that were eaten up, the retainer and the actuated. All parts but the spring are plastic. Did all according to your instructions. Happy to report all went well. Washer is working again.
