This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
This insert is sold individually. Knob not included. Knob is sold separately.
$14.15
In Stock
Questions And Answers for WTW4855HW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
16 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cindy
December 20, 2021
How would the upper agitator interfere with agitation? Mine is not broke. I’ve changed the hub kit, no luck. Would the lower part of the agitator need replacing? The machine spins great
For model number WTW4855HW1
Hi Cindy,
Thank you for your question. If your washer is not agitating, the upper agitator is one part that you will need to check. There are some other parts that you will need to check to see which one is causing the issue. You will also need to check the drive pulley, the shift actuator, the drive block, the door lock assembly and the washplate. We have included a link that you may reference on how to check these parts. We hope this helps! Good luck with the repair!
At the start of the spin cycle, a screeching goes on for about 4-5 seconds. Any help would be appreciated. TY
For model number WTW4855HW1
Hi Glenn, thank you for getting in touch. We would recommend checking the drive belt, part number PS12578772. You may need to replace it to fix the issue. We hope that helps!
Does whirlpool this model have springs in it and if it does where are they located? If a belt is broken would it hit the sides of washer only in spin cycle?
For model number WTW4855HW1
Hello Rhonda, thank you for writing. When shock absorbers weaken or become damaged, unbalanced loads will cause the washer to shake or move and the machine will often make a loud banging sound during the spin cycle. The Shock or Suspension kit is part PS12349409.
The washing machine works but when it enters the drain cycle,that is, drying clothes it’s makes a very loud sound as if something is loosened and start to move.
For model number WTW4855HW1
Hello Sra, thank you for your query. We recommend checking the clutch assembly, part number PS10057144, the drive belt, part number PS12578772, and the gear case, part number PS16220910, to resolve your issue. Please reach out to customer service if you need help placing an order. Glad to be of help!
My wash machine is making a whistling sound when it spinning with certain loads
For model number WTW4855HW1
Hello Lisa, Thank you for the question. The whistling noise may occur when the washer is filling with too much water pressure. Try adjusting hot and cold water taps or replacing the Water Inlet Valve. We hope this helps!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
