This inlet valve assembly controls the flow of hot and cold water into your washer, ensuring the drum fills at the correct temperature during each cycle. Located at the back of the machine where the w...
Maintain a watertight seal and prevent leaks with this genuine bellows assembly, designed for LG front-load washers. Also known as a door boot bellow or tub-to-pump hose, this flexible rubber gasket c...
Got an LG washer that needs a fix? We have the perfect solution for you! Here is our bespoke screw, made just for LG washing machines. It's crafted to meet safety and efficiency standards, ensuring a ...
This drain pump assembly is responsible for removing water from your washer during the drain cycle. It is typically at the bottom of the washing machine and connected to the drain hose. If it is damag...
This part is the replacement switch assembly for your top-load washer. It contains the switch mechanism and the connecting wire that hooks the door latch to the electrical system of the washer. The li...
Keep your washer running smoothly with this clutch motor assembly. It helps the drum switch between washing and spinning so clothes get clean and water is removed efficiently. If your washer won’t spi...
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kamal
March 5, 2024
Hi I have WT7150CW with Impeller. Is it possible to change IMPELLER WITH Agitator of WT7305CW. If yes give me the nos of parts to replace and price as well. THANKS
For model number WT7305CW
Hello Kamal, thank you for the great question. The agitator for model number WT7305CW does not fit the model number WT7150CW. It is not possible to interchange parts between the two different models. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill
July 5, 2023
The washing machine does NOT POWER up when the power button is touched.
For model number WT7305CW
Hello Bill, thank you for reaching out. You may need to check the display and main control board, part number PS16223695, to fix the issue. It processes the cycle settings you choose. The interface also houses the display for the washer. We hope this helps, good luck with this repair!
E 6 fault code it says to replace the clutch assembly
For model number WT7305CW
Hi Bill, thank you for reaching out to PartSelect. If your model is displaying an E6 error code, this indicates an error with the clutch housing assembly. An E6 error can also occur when a coin or foreign object is stuck between the pulsator and the tub. If any item is stuck, you may need to remove that to fix the issue. If this is not the case, then you may need to replace the clutch housing assembly, part number PS16222849. Let us know if you have further questions!
Once in a while I get little brown flakes that seem to be grease or something that are left on clothing after wash. I do a tub clean and it seems to create more of them. Any advise?
For model number WT7305CW
Hi Neal, thank you for reaching out. Based on our research, the issue is most probably with the drain pump, part number PS12748410. You may need to replace it to fix the issue. We hope this solves your problem!
The power button no longer functions. What part would I order to remedy this situation?
For model number WT7305CW
Hi John, thank you for contacting us. We believe your washer is having this problem because of the faulty display and main control board assembly, part number PS16223695. We would suggest replacing it to fix the issue. Glad to be of assistance!
raised the front of washer by hand (literally) and placed two 2x4 blocks under front lip for support. reached up inside washer cabinet and unscrewed the broken leg piece upwards into the cabinet. this was the only way I could get the broken piece out without some specialized tool to reach it from the underside. replacement with the new leg was a breeze.
Very close to the installation video online at Parts Select. Removed the back panel, unclipped the hose from the inner fitting and replaced with the rear hose. Why it didn;t leak on the inside is interesting as there was no clip on the at the inner fitting. The one difference from the existing install video online was that I didn't have to tip the washer over ~75 degs before replacing. I instead found that I could put to cinder blocks under the back edge to replace the drain hose. This made the job quicker without having to worry about having a box for it to rest on (with any risk of falling to the floor).
