This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a w...
This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. Th...
This inlet valve assembly controls the flow of hot and cold water into your washer, ensuring the drum fills at the correct temperature during each cycle. Located at the back of the machine where the w...
Got an LG washer that needs a fix? We have the perfect solution for you! Here is our bespoke screw, made just for LG washing machines. It's crafted to meet safety and efficiency standards, ensuring a ...
This drain pump assembly is responsible for removing water from your washer during the drain cycle. It is typically at the bottom of the washing machine and connected to the drain hose. If it is damag...
This part is the replacement switch assembly for your top-load washer. It contains the switch mechanism and the connecting wire that hooks the door latch to the electrical system of the washer. The li...
Getting your LG washing machine back to its top-performing state is quicker and simpler with our genuine Original Equipment Manufacturer (OEM) Motor Assembly Clutch. This part steps in to switch your ...
$155.97
In Stock
Questions And Answers for WT7100CW
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cara
October 11, 2023
Husband took apart our LG washing machine model number WT7100CW /01
because he is an idiot and thought it would be good for it to assist in drying it out despite my disapproval as we had a major flood. Now it's broke, we can't afford a repair. It's displaying E6 code not attached to water if that matters?
What should I do?
For model number WT7100CW
Hello Cara, thank you for contacting us.The E6 error code indicates an error with the clutch. Sometimes an alarm can be false, so you need to start with a reboot. Unplug the cord, allow the machine to stand for about 10 minutes, turn on the power again. If the electronics fail, everything will be solved by itself and the E6 error will disappear. An E6 error can occur when a coin or foreign object is stuck between the pulsator and the tub. To resolve the issue, first remove every item from the washtub. Use a flashlight and visually check the bottom of the washer drum. Look for the seam that is between the pulsator and the drum. Check to see if objects are jammed in the seam and causing the washer to not spin. Many times there will be a nail, a coin, or paperclip jammed in between them. If you see an object jammed between the drum and pulsator, remove it with a tool such as a pair of pliers or needle nose. Once the object is removed, do a test wash to see if the washer is now working and the error code is cleared. If this does not help, you may need to replace the diverter motor, part number PS3579314, maybe because the clutch is not changing position. Good luck with this repair!
Washer has growling sound. Is this likely the pulsator?
For model number WT7100CW
Hi Greg, thank you for your inquiry. Based on our understanding of the issue, before replacing the pulsator, we would suggest checking the gearcase, part number PS12749932, to solve the problem. Glad to be of assistance!
Removed the center cover cap carefully on top of the agitator with a small screw driver. There are 3 (on mine) little slots around the edge of the bottom of the cap where it meets the agitator. Insert the small flat blade screwdriver and gently twist at each one till the cap pops loose and comes off.
There was a 10MM bolt under the cap on mine that you need to remove. I used an cordless impact driver but you could use a socket wrench as well. Remove the bolt and the agitator comes off. May take a little wiggling or it may come right off.
The teeth on the agitator were wore all the way down and gone on mine so it came off easy and this was the issue I had why it was spinning freely. I took the small flat blade screwdriver and used the edge and corner of the blade to clean the teeth on the shaft where the agitator attaches and wiped it down before installing the new part as there was quite a bit of metal shavings from the damaged part.
I just reversed the order of removal to install the new part. Took about 15 min. I ran a rinse and spin cycle to remove any additional metal shavings and to check to see if it all worked properly. THATS IT! TOO EASY!
I found the pulsator just spun freely, I determined the hole on underside should ribbed to align with the ribbed shaft. But it was wore away. I purchased the new part and replacement was simple. It slide right on and I replaced the bolt. Pulsator works great, washing again.
