This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a w...
This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stop...
This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. Th...
This drain pump is for washers. Drain pump removes water from the washer during the drain portion of the cycle. Unplug the washer before installing this part. Wear work gloves to protect your hands.
Is your LG washing machine's top lid not functioning correctly? Don't worry! You might just need to replace the top lid hinge. This genuine top lid hinge is crafted specifically to give your LG washin...
This clutch housing assembly with mode shifter, or washer drive shaft and shifter assembly, is made for your washer. It connects the appliance wash plate to the motor so the washer can shift the drive...
Discover how you can keep your LG washer running like a breeze with our authentic LG Washer Shifter Coupling. This key component enables your washer to transition from agitation to spin cycle smoothly...
This suspension assembly helps stabilize the washer drum during spin cycles, reducing vibration and noise for smooth operation. Built for strength and reliability, it restores balance when the origina...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stacey
December 19, 2024
When I turn it on. Doesn’t do nothing. And shows the code LE. I have done a complete rest. Still showing it. Help.
For model number WT1101CW
Hi Stacey, thank you for reaching out. An LE error code is displayed when the tub fails to spin. We would suggest checking the motor stator assembly, part number PS3522950. You may need to replace it to fix the issue. We hope this solves your problem!
my hot water keeps pumping as soon as the washer is powered on. Replaced the water inlet valve assembly as the middle two valves were rusty. This did not help. Have tried the reset many times but to no avail. Tried starting a load with cold water only and the hot water shut off but will not pump water at all at that point.
For model number WT1101CW
Hello David, thank you for your inquiry. Since you have replaced the water inlet valve and that does not solve the problem, we would recommend checking the display control board, part number PS7793226, to fix the issue. It provides the display for the control panel and communicates the cycle you choose to the washer main control board. We hope this solves your problem!
Top loader, door latch fails to engage. Displays “dl” on screen as error. Can I fix this temporarily? Do I need to order part? Please advise.
For model number WT1101CW
Hello Betty, thank you for the great question. According to our research, the dl error code indicates that there is an issue with the washer lid switch. As there is no temporarily fix for the error code, you may need to replace this part. The lid switch assembly, part number PS3644957, is compatible with your model. We hope this solves your problem!
Hi Duane, thank you for the question. First, you may need to make sure that the load is balanced inside the tub and the washer is level. If that is not causing the issue, then you may need to replace the suspension rod assembly, part number PS8749609, as it is most likely faulty. We hope this helps!
1-Take water off manually. 2- Take machine to back yard. 3- lay machine 45 degrees. 4- Located water bump, (rear left side). 5-removed drain black hoses with hand. 6-removed 3 screws from bump frame. 7-Taker off all unit and marked down cable position at plug. 8- installed new pump. 9- Reverse all steps. Note: I did not use new cable supplied with the new bump, I did not want to mess around on mother board connections, I kept old wire harness which are only two cables blue and gray. It took me less than 30 minutes.
Popped out the plastic "doors" that cover the metal actuators. Removed the metal actuators on both right and left sides of the door then unscrewed (3 screws each actuator) them from door frame. Slid the actuators out to enable the door to be removed. Unscrewed 2 screws on the top front of the washer which enabled me to angle the top of the washer to expose the screws that hold the plastic hinges. Unscrewed the hinges (2 screws each) and replaced both of the hinges (I figured I'd do both of them now so I don't have to do it again for another 15 years). Put everything back together and all works like new.
