This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Are you tired of your dryer not functioning as it used to? Your stress ends here with our GE Dryer Drum Bearing. This is more than just a spare part - it's an essential component that brings your drye...
Having trouble with a leaky washing machine? We completely understand how frustrating it can be. That's why we have the Genuine GE Washing Machine Tub Seal. It's like the hero of your washing machine,...
No Longer Available
Questions And Answers for WSM2700WBAA
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed 2 Hose clamps with pliers. Unplug power source from drain pump. Unscrew 2 mounting screws with 5/16" nut-driver then replace unit in reverse sequence...... Very simple.
took the top off, then the front,there 2 screws that hold the front on. there's a yellow thing on the front took that off, it is held on with one screw. on the back of the dryer on the bottom is a metal plate take that off, to get to the belt take that off. then there' 3 screws in the drum, take them off ,then you can slid the drum out. then take 2 screws off the bearing bracket, that's it. easy
