This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Are you tired of your dryer not functioning as it used to? Your stress ends here with our GE Dryer Drum Bearing. This is more than just a spare part - it's an essential component that brings your drye...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ericka
February 24, 2020
The washer is making a loud squeaking noise that gets progressively worse. This only happens on the spin cycle. We have put a new belt on the washer but the squeaking still happens
For model number WSM2700WAWAA
Good Day Ericka. Thank you for your question in regards to your unit (Model Number WSM2700WAWAA). Based on our research you may need to replace the Tub (PartSelect Number PS273328) or the bearing (PartSelect Number PS273717) in order to solve the issue you are having. You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Removed 2 Hose clamps with pliers. Unplug power source from drain pump. Unscrew 2 mounting screws with 5/16" nut-driver then replace unit in reverse sequence...... Very simple.
took the top off, then the front,there 2 screws that hold the front on. there's a yellow thing on the front took that off, it is held on with one screw. on the back of the dryer on the bottom is a metal plate take that off, to get to the belt take that off. then there' 3 screws in the drum, take them off ,then you can slid the drum out. then take 2 screws off the bearing bracket, that's it. easy
