This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Having trouble with a leaky washing machine? We completely understand how frustrating it can be. That's why we have the Genuine GE Washing Machine Tub Seal. It's like the hero of your washing machine,...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brandon
December 1, 2019
Will not spin sometimes. Can put on different spin cycle and it might start spinning or might not. Put back on other spin cycle and might spin or seems like it spins half speed and can smell belt. But if keep changing to other spin cycle it will eventually spin full speed and spin all water out.
For model number WSM2700TEWWB
Hi Brandon, thank you for your question. There are a few parts that you may want to check for this issue in your washer. Physical parts to check for wear and tear would be your trunnion, and your bearing. Electrically you may want to take a look at your lid lock. If that part is malfunctioning then it will effect the spin cycle. However if all of those parts are fine then the parts to check would be your transmission, your motor, and your timer. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed 2 Hose clamps with pliers. Unplug power source from drain pump. Unscrew 2 mounting screws with 5/16" nut-driver then replace unit in reverse sequence...... Very simple.
The part arrived in just a couple of days and was exactly the right one. Simply removed the old and replaced and now the dryer works 100 percent better. .
