This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
$27.33
In Stock
Order within the next 11 hrs and your part ships today!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your prod...
$27.28
In Stock
Order within the next 11 hrs and your part ships today!
The EDR1RXD1 water filter uses advanced filtration technology to reduce over 20 types of contaminants, including pharmaceuticals, pesticides, and lead. Certified to meet NSF/ANSI standards, it deliver...
$49.99
In Stock
Order within the next 11 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 11 hrs and your part ships today!
This clear plastic door bin attaches to the inside of the refrigerator door and holds jars and bottles. Door bins can crack and break due to frequent and heavy use, and faulty bins should be replaced.
$77.91
In Stock
Order within the next 11 hrs and your part ships today!
This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets f...
$16.43
In Stock
Order within the next 11 hrs and your part ships today!
***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and th...
$176.56
In Stock
Order within the next 11 hrs and your part ships today!
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$37.27
In Stock
Order within the next 11 hrs and your part ships today!
Order within the next 11 hrs and your part ships today!
Questions And Answers for WRF560SEHZ00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
49 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
July 16, 2021
How do i remove freezer drawers,on this model
For model number WRF560SEHZ00
Hi Dan,
Thank you for your question. To remove the freezer drawers, open the door all the way. On the left rail of the upper drawer, use a flathead screwdriver to push in on the rail to release the tab. Once the left tab is loose, place your finger on the right hand tab and remove the upper drawer. To remove the bottom drawer, push it as far back as you can and then tilt the front of the drawer up towards you. Then pull it straight out. We hope this helps! If you have any questions, please let us know.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Geo
July 18, 2023
Not dispensing water or making ice. Changes water filter still not working
For model number WRF560SEHZ00
Hello Geo, thank you for the query. According to our research, you may need to check the water inlet valve, part number PS11751799, to fix the issue. We hope this helps!
Hello Mark, thank you for the question. If the condenser coils are dirty, they won’t dissipate the heat effectively. As debris builds up on the coils, the refrigerator becomes less efficient, causing the refrigerator to work harder to cool down. If the coils are significantly dirty, the refrigerator will not be able to maintain the proper temperature. Check the condenser coils to determine if they are dirty. If the condenser coils are dirty, clean them. If the issue persists, we recommend you replace the temperature sensor, part number PS11753996. We hope this helps!
The on off wire switch becam disengaged from the icemaker. How does it go back in? Apparently something fell into the ice tray and puched against the wire switch when the drawer was closed.
For model number WRF560SEHZ00
Hi John, thank you for reaching out. To install it back in, look for the small holes on the ice maker where the wire arm is supposed to be attached. These are on the side of the ice maker. Carefully insert the end of the wire arm into the holes. Make sure the slot is pointing down, slide it in, pop it back in. It should lock in the upright position, or off position and fall free. Gently move the wire arm up and down to ensure it is properly attached and can move without obstruction. Turn the ice maker back on and check to see if it is functioning correctly. We hope this information helps!
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
I am NOT a handyman, and my family laughed at me when I said I was going to fix the ice maker all by myself. I ordered a replacement ice maker. When it arrived, I opened the box and read the instructions. It seemed easy. I removed the old ice maker, with a socket set. I then took off the shut off lever from the old one and placed it on the new one, since the new one didn't come with it. I then put the new one in place. All the parts fit perfectly. The ice machine was making ice within an hour. My family was amazed... and I got the last laugh!
