This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the draw...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
This OEM refrigerator filter is for french door and side-by-side door types and is located in the back, top-right of your appliance. By absorbing heavy metals, pharmaceuticals, pesticides, chlorine, a...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
Made from durable, transparent plastic, this door shelf bin attaches to the inside of the refrigerator door to store small items like condiments and jars. It’s compatible with select Whirlpool, Maytag...
This part allows the cold air from the freezer section to be aired into the fresh food section and it is controlled by the thermostat.
$184.20
In Stock
Questions And Answers for WRF555SDFZ11
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
12 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
March 18, 2024
How do I replace the light?
For model number WRF555SDFZ11
Hello Fred, thank you for your question. You can replace the Light Module PS16555201 by using the following instructions: 1. Unplug the refrigerator or disconnect the power. 2. Remove the light shield and the hardware holding the light shield in place. 3. Slide the light shield toward the back of the compartment to release it from the light assembly. 3. Replace the burned-out bulb with a bulb of the same size, shape, and wattage. 4. Replace the light shield by inserting the tabs on the shield into the liner holes on each side of the light assembly. Slide the shield toward the front until it locks into place. 5. Replace the hardware that holds the shield in place. 6. Plug in the refrigerator or reconnect the power. We hope this information helps!
Looking for refrigerator light replacement. Located in the top of the frig, NOT a bulb. Looks like about a 7" x 12" fixture with 8 bulbs in it. Only one is out but frig is almost completely dark. Thanks
For model number WRF555SDFZ11
Hi Lana, thank you for getting in touch. The LED light module assembly you are looking for is part number PS16555201. We hope that helps!
Ice dispenser works but water dispenser does not. When you try to dispense water the light comes on but no sound and no water.
For model number WRF555SDFZ11
Hello Brad, thank you for your question. You may just need to replace the water filter. But, it may also be a water pressure issue with the household water supply. Lastly, it may be the a Dispenser Actuator Pad PS11753827. We hope this helps.
Clicking noise after dumping ice. Makes ice. No water leaks or other issues. Just makes clicking noise every second for about one minute then stops. Your thoughts for repair parts.
For model number WRF555SDFZ11
Hello Jack, thank you for asking. Repetitive Clicking can be heard when the dual evaporator valve is regulating the cooling operation. You may hear rapid repetitive clicking sounds as the unit switches from cooling one compartment to cooling the other. This sound is normal. We are pleased to have been able to help.
Was this helpful?
Thank you for voting!
Roger
November 16, 2023
Can't turn on the ice maker. The arm on the side is down. The front door shows that the ice make is off. How do you turn the ice maker on?
For model number WRF555SDFZ11
Hi Roger, thank you for contacting us. You can turn the ice maker on or off from the control panel. To manually turn on the ice maker, press temp and fast cool at the same time and hold for 3 seconds until the ice maker off icon disappears. Glad to be of assistance!
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
Remove food off of lower shelf, remove the two produce drawers, remove large lower drawer, remove glass shelf, remove three screws holding end cap in place. Once end cap was removed the drawer track could be removed and placed on new end cap. Installation of new end cap took less than 5 minutes. Most of the time spent was removing/replacing food and cleaning the shelf/bins. PartSelect was awesome BTW!
Remove Crisper drawers from Bottom Shelf. Remove glass from the top of Bottom Shelf. Drop new Crisper frame center rail into slots on the top of the Bottom Shelf shelf. Replace glass onto the top of the Bottom Shelf. Slide drawers between left and right guides and the Crisper frame center rail.
Total repair time less than one minute. No tools required.
